Lug Nuts that Fit Malone MicroSport Trailers

Question

Question:

Will itemLHLR103 Lionshead Trailer Wheel Lug Nuts fit on a Malone MBG460 ET Micro Sport?

asked by: Brian T

1

Helpful Expert Reply:

Yes the lug nuts # LHLR103 that you referenced are a fit on the Malone MicroSport trailers.

expert reply by: Jameson C

1

Answer 1

The best way to secure your kayak to your Malone EcoLight Trailer #MAL53FR when utilizing the Hobie Style Carriers and Hardware #MPG5576-6 is to use a ratchet strap that has loops on both ends (see attached picture). We do have some available on our…

view full answer...

Answer 2

I have another option for you. While extremely similar, the Kenda 4.80/4.00-8 Bias Trailer Tire #AM30070 would not be the correct replacement/spare tire option. The #AM30070 is a load range C tire, while the tires on the Malone EcoLight Sport Trailer…

view full answer...

Answer 3

Sorry to hear about that! The wheel studs part #K12WB169 would be what you'd need for the hub of your rebranded Malone MicroSport Trailer #MPG460G that you referenced. Hopefully karma catches up with that guy.

view full answer...

Answer 4

Hey William! What happened to your fender? Malone does have a replacement fender available for the MegaSport Kayak Trailer #MPG535. The fender is the Replacement Galvanized Fender for Malone MegaSport Trailers #MAL43DR. If you need the mounting…

view full answer...

Answer 5

We actually carry the spare tire that fits the Malone MicroSport Trailer #MPG460G. The spare is #MPG465 and does have a 5 on 4-1/2 bolt pattern. With that being said it would be more cost effective for you to purchase two 4.80-12 trailer tires, like…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Lug Nuts that Fit Malone MicroSport Trailers

Product Page this Question was Asked From

Continue Researching