Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty trailer is great for hauling heavy kayaks or canoes. Padded bunks protect your boats and hold them securely in place. Storage containers let you carry wet and dry gear separately. Marine-grade trailer supports boats up to 20' long.
Features:
Specs:
Coupler Specs:
Tire and Wheel Specs:
Note: Your local municipality requires you to register your trailer with the DMV. An etrailer representative will be reaching out to get information from you for the title.
Heavy-duty bunks stabilize your boat and prevent movement while traveling on uneven or rough terrain. They can be adjusted to accomdate different size hulls and eliminate boat-to-boat contact. The bunks' durable padding prevents scuffs, scratches, or damage to your boat during transport. To prevent mold or mildew, the bunks have weather-resistant covers to repel moisture and water.
This versatile storage container conveniently stows your important cargo and slides out from between the crossbars for easy access to your gear. It has a removable lid with water-tight gasket to ensure your gear stays dry. A metal hinge and hasp is used to secure the lid to the container and can be used with a padlock (sold separately) to deter theft.
This lightweight wire storage basket is great for holding all your wet or dirty gear after a day on the water. The open mesh design allows your gear to dry while being stored. With a black powder coated finish, this container is durable and weather-resistant.
The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs.
The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness.
Run the wires of the tail light harness along the sides of the trailer frame and plug the individual wires into the matching wires on the side marker lights and the tail lights. The wires are color-coded so that you can easily match them up - no circuit tester is required. Once all of the wires are plugged in, use the included clips to secure the harness to the frame.
When you're ready to connect the trailer to your vehicle, simply plug the trailer end of the main harness into the 4-way flat connector on your vehicle.
This trailer includes a leaf spring suspension system to limit road shock while you tow. A sturdy steel axle runs beneath the trailer frame. The 2 slipper springs that support the axle flex to absorb the rough motion that can occur when driving over bumpy terrain. Also, the axle, spring hangers, and tie plate are galvanized to resist rust and corrosion.
Hooking this trailer to your vehicle is quick and easy. The trailer's coupler connects to a 2" hitch ball, and the included safety chains act as an emergency measure if the coupler accidentally disconnects from your hitch ball. A rubber coated lift handle is mounted to the coupler to provide a solid grip for lifting or maneuvering the trailer. Finally, the skid plate on the underside of the trailer tongue keeps the coupler from touching the ground.
An easy-to-use manual crank jack allows you to raise or lower the coupler height for quick trailer adjustment. The jack comes with a swiveling wheel that rotates 360 degrees for full trailer control. A built-in handle twists and locks into place, folding the jack in a horizontal position against the tongue when not in use.
Ratings & Reviews

Fred D.
2/18/2022
Very functional kayak trailer, stable when towing and easy on and off for an 81 year old kayaker

Eric
12/5/2023
I love this trailer! It was relatively easy to put together and I have taken it on countless trips and driven to multiple other states it is a great, reliable trailer for all of our kayaks.


Dan
9/19/2021
Love it !

Guy
4/2/2025
Been working great. Made a few mods for my inflatable boat. Travels down the road very nice.


Douglas
5/31/2022
It is holding up great, it a real nice trailer no issues.
Do you have a question about this Kayak Trailer?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



















Richard H.
5/29/2021
We still love our Malone Megasport trailer. We can haul our 4 Eddyline kayaks without having to stand on a step stool to lift them on to our car or truck. I did order the Fulton bolt on fold away hinge kitalso from etrailer and installed it so the trailer more easily fits into our garage. The trailer was a great investment for us!