Does Trailer Hitch for 2020 Mercedes Sprinter 2500 Attach to Outsides of Vehicle Frame

Question

Question:

On a 2020 sprinter 2500 144” factory step bumper, does the receiver mount on the outside of the frame rails, about 38- 3/4” outside of frame?

asked by: Charles B

0

Expert Reply:

Yes the Draw Tite hitch part # 75601 does attach to the outsides of the frame rails of your 2020 Mercedes Benz Sprinter 2500. You can see this in the install instructions diagram that I attached to this page.

expert reply by: Jameson C

0

click to enlarge

Answer 1

What you see in the pictures for Curt trailer hitch #13358 is the factory step bumper that comes on some Sprinter vans. There is probably an aftermarket version of it out there but we do not carry it. It is attached separately from the vehicle on the…

view full answer...

Answer 2

The hitches that fit the 2021 Mercedes Benz Sprinter 2500 with the step bumpers like part #75601 do sit lower than the vehicles that do not have the step bumper like part #75549. If you check out the two picture I attached you can see that the…

view full answer...

Answer 3

The Draw Tite #75601 and the Curt #13358 that you referenced both are a fit for your 2017 Mercedes Benz Sprinter 2500. They have very similar ground clearance but the Curt has the slight edge as it seems to sit a bit higher. I attached a picture that…

view full answer...

Answer 4

If your 2019 Mercedes-Benz Sprinter 2500 has a standard bumper without the step, the Draw-Tite #75549 is going to provide you with the most ground clearance at 15" from the bottom of the receiver tube to the ground. If your Sprinter has the…

view full answer...

Answer 5

Hey Rick, thanks for reaching out! The Draw-Tite Max-Frame Trailer Hitch Receiver #75549 fits with the standard bumper on your 2022 Mercedes-Benz Sprinter 2500. The only alternative would be the factory step bumper, which works with the Draw-Tite…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does Trailer Hitch for 2020 Mercedes Sprinter 2500 Attach to Outsides of Vehicle Frame

Continue Researching