Draw-Tite Hitch Options for a 2022 Mercedes-Benz Sprinter 2500

Question

Question:

I have a 2022 sprinter with the extended bumper will this hitch fit 75549?

asked by: Rick V

0

Expert Reply:

Hey Rick, thanks for reaching out!

The Draw-Tite Max-Frame Trailer Hitch Receiver # 75549 fits with the standard bumper on your 2022 Mercedes-Benz Sprinter 2500. The only alternative would be the factory step bumper, which works with the Draw-Tite # 75601.

I'm not quite sure what you mean by "extended" bumper, but if you don't think it's the step bumper just let me know and I'll help you look further into this!

expert reply by: Jon G

0

Rick

2/6/2025

Hey Jon Yes I'm referring to to the step number, and I'm looking for a class 4 hitch. Please advise Thank You Rick

Jon G.

2/6/2025

@Rick We've only got Class 3 hitches that fit with the step bumper. Are you needing the higher weight rating for the hitch? I checked online and it looks like the max towing capacity of your Sprinter might not be over that 5,000 lbs weight rating of the Class 3 hitch. Do you know what your tow weight rating is?

Answer 1

Yes the Draw Tite hitch part #75601 does attach to the outsides of the frame rails of your 2020 Mercedes Benz Sprinter 2500. You can see this in the install instructions diagram that I attached to this page.

view full answer...

Answer 2

The hitches that fit the 2021 Mercedes Benz Sprinter 2500 with the step bumpers like part #75601 do sit lower than the vehicles that do not have the step bumper like part #75549. If you check out the two picture I attached you can see that the…

view full answer...

Answer 3

To attach your 2018 Mercedes-Benz Sprinter 2500's factory 7-way to the Draw-Tite Max-Frame Trailer Hitch Receiver item #75549 you will want to use the Mounting Bracket for 7-Way item #18138. To attach it to the Curt Trailer Hitch item #C13388 you…

view full answer...

Answer 4

Hi Travis; what you linked was a rear step. I don't have a way to know if the #75549 (for standard bumper) or #75601 (for step bumper) will fit with that FVCO step. The step looks like it fits a standard bumper so I suppose it is possible, but…

view full answer...

Answer 5

Rodney, it does not look like the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7904 is going to work with your 2024 Forest River Forester 2401B MBS. It look like this motorhome was built on the Mercedes-Benz 3500 chassis and has a…

view full answer...

Answer 6

The only trailer hitch that we currently offer that will fit a 2021 Mercedes-Benz Sprinter 2500 passenger van is the Draw-Tite Max-Frame Trailer Hitch Receiver #75549. This hitch does not fit models with a 30-3/8" frame, measured from outside to…

view full answer...

Answer 7

Yes, the Draw Tite hitch part #75549 does fit your 2017 Mercedes Sprinter 2500 passenger van without the rear step and the frame width 39-1/2 inches that you mentioned.

view full answer...

Answer 8

I can definitely say the Draw-Tite #75549 will fit your 2020 Mercedes-Bens 2500. It also looks like the stock exhaust will not need to be modified for the install. I included an install video we did on a 2016 Sprinter for you to take a look at as…

view full answer...

Answer 9

Hey Pablo, If your 2020 Mercedes-Benz Sprinter 2500 has a 144" or 170" wheelbase with a standard bumper you'll need the Draw-Tite Max-Frame Trailer Hitch Receiver #75549. If you have a 144" or 170" wheelbase with a factory…

view full answer...

Answer 10

We haven't had the chance to install both the Curt #C13388 and Draw-Tite #75549 trailer hitches on the Mercedes Sprinter to do a comparison, however I did go out to our warehouse to take a measurement on each to determine which will sit higher…

view full answer...

Answer 11

For your 2021 Mercedes-Benz Sprinter 2500 with the standard bumper, the Curt #C13388 and the Draw-Tite #75549. While we have not had a chance to install both of these hitches yet, when we measured these hitches we found that from the center of the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Draw-Tite Hitch Options for a 2022 Mercedes-Benz Sprinter 2500

Continue Researching