Do the Andersen AlumiBalls For Their Rapid Hitch Fit The Ultimate Connection Hitch?

Question

Question:

Wondering if Andersen 3453 or 3453-25 balls can be fit right into the base for this #3209.Do the Andersen Alumiballs for their Rapid Hitch fit?

asked by: John

0

Expert Reply:

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs # AM3200 uses hitch ball # AM3201 only. It is not compatible with the greaseless AlumiBall # AM3453 which is only compatible with the Rapid Hitch Ball Mount options.

expert reply by: Jason S

0

Answer 1

The Andersen Ultimate 5th Wheel Hitch 3220 will fit onto the Reese Gooseneck Ball #RP19311. This ball can not be used as a Replacement Ball #AM3201 on the Andersen Ultimate 5th Wheel Hitch #AM3200.

view full answer...

Answer 2

The Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System - 2-5/16 Item #AM3201 has the same weight rating of the adapter it fits of 20,000 lb capacity.

view full answer...

Answer 3

While we do have the correct replacement ball for your Andersen Ultimate Connection 5th Wheel Trailer Hitch #AM3200, Andersen stopped making the ball with three holes, and now only has the ball with two holes: - Replacement Ball for Andersen Ultimate…

view full answer...

Answer 4

The Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AM3201 is made of a zinc plated aluminum to help resist rust and corrosion. This is the correct replacement ball from Andersen and there currently is not a steel…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 11

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Do the Andersen AlumiBalls For Their Rapid Hitch Fit The Ultimate Connection Hitch?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching