What Is the Replacement Ball for the Andersen Ultimate Connection Made of

Question

Question:

Is this steel or aluminum? And if its aluminum, is there a steel version?

asked by: TJ

0

Expert Reply:

The Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System # AM3201 is made of a zinc plated aluminum to help resist rust and corrosion. This is the correct replacement ball from Andersen and there currently is not a steel option available.

expert reply by: Scott S

0

Answer 1

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs #AM3200 uses hitch ball #AM3201 only. It is not compatible with the greaseless AlumiBall #AM3453 which is only compatible with the Rapid Hitch Ball Mount…

view full answer...

Answer 2

The Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System - 2-5/16 Item #AM3201 has the same weight rating of the adapter it fits of 20,000 lb capacity.

view full answer...

Answer 3

Hey Jeff, so we only carry the replacement ball for the Andersen Ultimate that has two holes with the part #AM3201. I don't believe we ever carried a version that had three holes but this would work for you to replace what you have.

view full answer...

Answer 4

I do have options for you but if you were using the lower most hole on the hitch ball for the Andersen Ultimate Connection 5th Wheel Trailer Hitch part #AM3200 then that is going to be your max height for this hitch as they do not make a taller ball…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 8

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 9

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 12

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

What Is the Replacement Ball for the Andersen Ultimate Connection Made of

Product Page this Question was Asked From

Continue Researching