What is Weight Capacity of Replacement Ball for Andersen Ultimate Connection

Question

Question:

Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System - 2-5/16 Item # AM3201 looking for wt rating on this ball , thank you ,

asked by: Ken K

0

Expert Reply:

The Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System - 2-5/16 Item # AM3201 has the same weight rating of the adapter it fits of 20,000 lb capacity.

expert reply by: Jameson C

0

Answer 1

While we do have the correct replacement ball for your Andersen Ultimate Connection 5th Wheel Trailer Hitch #AM3200, Andersen stopped making the ball with three holes, and now only has the ball with two holes: - Replacement Ball for Andersen Ultimate…

view full answer...

Answer 2

The Andersen Ultimate 5th Wheel Hitch 3220 will fit onto the Reese Gooseneck Ball #RP19311. This ball can not be used as a Replacement Ball #AM3201 on the Andersen Ultimate 5th Wheel Hitch #AM3200.

view full answer...

Answer 3

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs #AM3200 uses hitch ball #AM3201 only. It is not compatible with the greaseless AlumiBall #AM3453 which is only compatible with the Rapid Hitch Ball Mount…

view full answer...

Answer 4

The Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AM3201 is made of a zinc plated aluminum to help resist rust and corrosion. This is the correct replacement ball from Andersen and there currently is not a steel…

view full answer...

Answer 5

Hey Jeff, so we only carry the replacement ball for the Andersen Ultimate that has two holes with the part #AM3201. I don't believe we ever carried a version that had three holes but this would work for you to replace what you have.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Patrick, thanks for the measurement. The Travel Door Latch for GE Appliances RV Refrigerator item #GE98FR has mounting holes 1-3/16" on center. It's designed for the 9.8 Cu. Ft. GE Appliances RV Refrigerator with Top Freezer item #GE58FR…

view full answer...

Answer 11

Hey Bill! The Rebel is the heavier duty SumoSprings jounce springs and they have the higher weight rating at 3,000 lbs #SS64VR or 5,000 lbs #SS27GR. I usually only recommend these heavy duty versions if you have a lot of weight in the truck bed or on…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

What is Weight Capacity of Replacement Ball for Andersen Ultimate Connection

Product Page this Question was Asked From

Continue Researching