Where is Fan-Tastic RV Roof Vent Model Number for Correct Ultra-Breeze Vent Cover

Question

Question:

Where can I find the model number on my fantastic fan? I believe I will need this to order the correct Ultra-Breeze roof vent cover. Thank you

asked by: Bruce B

0

Expert Reply:

The model number for a Fan-Tastic RV roof vent is often found on a sticker on the top side of the fan, so you may have to carefully traverse to the top of your RV roof and open up the lid to find it. Here are the options for an Ultra-Breeze vent cover:

- Fan-Tastic Ultra Breeze Trailer Roof Vent Cover - White # FVU1500WH

- Fan-Tastic Ultra Breeze Trailer Roof Vent Cover - Black # DMC38FR

expert reply by: Kyle S

0

Answer 1

Hey Henry, yes the Dometic vent cover part #DMC38FR that you referenced would be the correct vent cover for your Dometic Fan-Tastic fan DV-4100. I know it seems odd but you don't actually need your vent to fully open to be able to flow as much…

view full answer...

Answer 2

Yes, John we sure do! To replace the fuses in your FanTastic Vent Fan you will need the Replacement 4 Amp Slow Burn Fuse Kit for Fantastic Fans item #DMC57FR you were looking at. This comes with two fuses that measure 1-1/4" x 1/4". The…

view full answer...

Answer 3

I spoke with my contact at MaxxAir regarding the MaxxAir 2 Vent Covers like the Smoke #MA00-933073 that you were looking at and the Standard Covers like #MA00-933067. He said there are two primary differences between the two models. The first is that…

view full answer...

Answer 4

The plastic housing of the Fan-Tastic Vent Roof Vent w/ 12V Fan #FV802250 is very sturdy and would hold up well. I'd recommend using a Fan-Tastic roof vent cover like the #DMC38FR instead though as this was designed specifically for use with the…

view full answer...

Answer 5

The correct replacement slow blow fuse for the Ultra-Fab Electric A-Frame Jack (3502 Model) part #UF38-944017 is the Replacement 30-Amp Slow Blow Fuse part #UF38-751034. Some other parts you may want to keep on hand are the Replacement 20-Amp…

view full answer...

Answer 6

If your roof vent, like the MaxxFan Plus #MA00-04500K, is supposed to operate via the control panel then it sounds like you need to check the connection from the panel to the vent and if that looks good the connection from the vent to where it is…

view full answer...

Answer 7

The Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted #FVK1020-19 is a fit for your Fantastic Vents 4000 series vent. The vent is the standard 14-1/4 by 14-1/4 inch and this cover is made to fit that standard size. You will simply need to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Blane! No, you don't necessarily need to replace your existing breakaway system when switching from electric drum brakes to electric-over-hydraulic disc brakes. You can reuse it as long as the battery meets the minimum capacity required by…

view full answer...

Where is Fan-Tastic RV Roof Vent Model Number for Correct Ultra-Breeze Vent Cover

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching