Parts Needed to Tow Small Trailer with Motorcycle with 2018 Toyota C-HR
Updated 07/17/2020 | Published 07/15/2020
Products Featured in This Question
Question:
Could I tow 600 lbs trailer with 650 lbs motorcycle with the CHR?
asked by: Richard
Expert Reply:
Your vehicle's owner's manual is always going to be the best source to find towing capacity, but from what I could find in my own research the towing capacity is going to be roughly 1300-lbs. Based off that, you would be able to tow a small trailer with a motorcycle. For a hitch I recommend using the Curt # C11490 because the concealed design it going to help give you a bit more ground clearance, which will be especially helpful for a smaller couple like the C-HR.
For a complete towing package you'll also need a wiring harness, ball mount and hitch ball. For wiring I recommend using the Tekonsha T-One # 118756 which will tee into your vehicle's tail lights and provide you with a 4 way trailer harness to activate the lights on your trailer. For a ball mount you'll want to use the Curt # C45521 and either # A-80 (1-7/8" hitch ball) or # A-82 (2" hitch ball) depending on the coupler size of your trailer.
I've linked some review videos of these parts for you to have a look at, as well as the installation video of the Curt hitch in case you'll be doing this yourself.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Trailer Wiring
- Video: Installation Guide for the Curt Trailer Hitch Receiver on a 2018 Toyota C-HR
- Video: Mount: Curt Trailer Hitch Receiver on a 2021 Toyota C-HR
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
- Q&A: Weight of Curt Trailer Hitch C11567 For 2020 Toyota C-HR
- Video: Feature Review Replacement Hardware Kit for Trailer Hitches
- Shop: Curt Class II Euro Style Drawbar with 1-7/8" Ball - 4-5/8" Rise - 3,500 lbs
- Shop: Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span
- Shop: Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
- Shop: Replacement Hardware Kit for Trailer Hitches
- Video: A Closer Look at the Curt Class II Euro Style Drawbar with 2" Ball
- Video: Hands-On with the Curt Class II Euro Style Drawbar with 2" Ball
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer wiring
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Brake Controller
- Search Results: trailer jack
on Trailer Hitch
