Could Inno Square Crossbars Fit Malone Microsport Trailer

Question

Question:

Hi it looks like the dimensions on the Inno 79 inch bar are the same as my 65 inch black malone bars. Do you know if they will fit this trailer. Thank you!

asked by: Jeff S

1

Helpful Expert Reply:

The Inno crossbars part # IN436L are the exact same dimensions as the Malone bars so this would work on your Microsport trailer that has shorter bars to extend them out to 79 inches.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 4

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 5

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 6

There sure is K.C.. For a shorter weight distribution shank that fits a 2-1/2" hitch, I recommend the Equal-i-zer item #EQ90-02-4700. This shank measures 12" long x 9-1/2" tall. It provides up to a 3" drop and has a 16,000 lbs…

view full answer...

Answer 7

Hey Steve, thanks for reaching out. We do have a good option for that. I recommend the following: - Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lb TW #C95MJ It’s designed for lighter trailers with 500–800…

view full answer...

Answer 8

Thanks for letting us help John. First off, congratulations on the new truck and trailer! We can definitely help you get everything set up for towing. For the brake controller, I'd recommend the Redarc Tow-Pro Liberty Brake Controller with Custom…

view full answer...

Could Inno Square Crossbars Fit Malone Microsport Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching