Disk Brakes Compatible with 4400 lb Axle
Updated 07/06/2020 | Published 07/02/2020
Products Featured in This Question
Question:
Do you have disk brakes for a 4400lb axle? I have a 2007 Keystone Cougar 281EFS and Im looking at a 2021 Grand Design Reflection 150 268bh - both list 4400lb axles but I cant find a kit for them. Thank you.
asked by: Josh L
Expert Reply:
There isn't a specific disc brake kit for 4,400 lb axles. The 4,400 lb axles use the same braking system as the 3,500 lb axles, so you can use the Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 3,500 lbs # K2HR35D-8 if you have 10-13 inch wheels and I recommend the
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs # K2HR35D for 14 to 15 inch wheels. These assemblies use bearing # L68149 and # L44649 so you will want to confirm the fit with your spindle. You can do that by removing your current bearings and looking at the face of the inner and outer bearing which will have a number printed on the face of each.
If you can't determine the bearing number you can use a digital caliper like # PTW80157 on the spindle in the bearing locations. I've attached a video and photo to assist.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet and KodaGuard - 5,200 to 6,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Rotor
- 5200 lbs Axle
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake actuator
- Search Results: brake actuator accessories and parts
- Q&A: Disc Brakes for Boat Trailer With 5-Bolt Brake Flange and 6 on 5-1/2 Bolt Pattern
- Shop: DeeMaxx Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Maxx Coating - 6,000 lbs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Search Results: surge break
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: Ultimate Overview of the Kodiak Disc Brakes
- Shop: TecNiq S14 LED Marker Light - Stud Mount - PC and P2 Rated
- Shop: TecNiq S19 1" x 4" Red LED Side Marker - PC-Rated - Clear Lens
- Shop: Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube
- Q&A: Are There Replacement Brake Pads for the Tie Down Engineering (TDE) 46304 Disc Brake Calipers
- Q&A: Parts Needed To Replace Hydraulic Drum Brakes W/ Hydraulic Disc Brakes On Karavan Boat Trailer
- Q&A: Is There an Exact Replacement For a Tie Down 46250 Brake Caliper or What Option is There
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Video: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles: The Breakdown
- Q&A: Disc Brake Conversion On 5th Wheel With Tandem 4400 lb Axles
- Video: An In-Depth Look at the Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles
- Video: Comprehensive Review: Trailer Idler Hub Assembly
- Video: Setting Up Your Kodiak 12" Hub-and-Rotor Assembly
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: How to Convert Trailer Drum Brakes Over to Disc Brakes
- Search Results: cart
- Search Results: wagon
- Search Results: 4400 lbs axle trailer brakes
- Search Results: maxxair rv vents and fans
- Shop: Fifth Wheel Hitch
- Shop: Brake Controller