Can I Install a Wall Switch on a MaxxAir MaxxFan Roof Vent
Updated 06/23/2020 | Published 06/19/2020
Products Featured in This Question
Question:
The fan I replaced the 6401k with had a rocker switch on the fan itself and a wall switch. We would leave the rocker switch onfoot and use only the wall switch. Is it possible to do this with the 6401k? If not is there a wall switch I could use compatible with my unit so I dont have to turn on/off or adjust speed on the unit itself?
asked by: Chris H
Expert Reply:
We've actually had this one asked before and have consulted with MaxxAir. Even though you can technically install the MaxxFan Deluxe Roof Vent # MA00-06401K wired to a separate switch, it is not recommended. The reason for this is that their fans are designed to have a constant 12V feed, and when an external switch is used there will be a short spike in voltage every time the switch is turned on, which over time could potentially cause issues with the circuit board on the vent.
Additionally, if you were to install a wall switch it would allow you to turn the fan on and off but you would still need to control the settings on the fan itself via the panel on the vent. Keep in mind though that with this setup the fan speed would reset everytime you turn it off which would require you to bump it up to your desired speed every time it's turned back on.
If you're looking for a unit that can be controlled with a wall switch, the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White # MA00-07000K would be a good option since it comes with a remote control that has a holder that can be mounted on the wall. This would be comparable to the functionality that you're seeking and doesn't require you to do anything that might potentially damage the unit in the process.
I've linked a review video of this unit for you to have a look at.
Product Page this Question was Asked From
MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke
- RV Vents and Fans
- Vent
- Roof Vent
- Manual Lift
- 12V Fan
- Plastic
- Tinted
- MAXXAIR
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 12 volt lights
- Search Results: dust caps
- Search Results: lippert 4400 lb axle
- Q&A: Grease Caps that Fit Lippert 3,500 lb Axle Hubs
- Shop: RV Exterior Lighting
- Shop: Furrion Built-In RV Convection Microwave and Air Fryer w/ Trim Kit - 900 Watts - 0.9 Cu Ft - Black
- Video: MaxxFan Deluxe Roof Vent DIY Install - 2023 East to West Alta Travel Trailer
- Q&A: Recommended White Motion Sensor LED RV Security Light
- Shop: Lippert Super Lube Dust Cap and Rubber Plug - 1.99" Diameter - Qty 2
- Shop: Lippert Super Lube Dust Cap and Rubber Plug - 2.45" Diameter - Qty 2
- Shop: Lippert Standard Dust Cap - 1.99" Diameter - Qty 2
- Shop: MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke
- Q&A: Will MORryde X-Factor Crossmember Work With AllTrek 4000
- Shop: Big Truck Big RV Tongue Weight Scale for Trailers - 2,000 lbs
- Search Results: 8000 lbs trailer leaf springs
- Search Results: xfactor
- Search Results: 4000 lbs trailer leaf springs
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Q&A: Dimensions for MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications
- Q&A: Will MORryde X-Factor Crossmember Adapter Kit for Drop Down Allow Avoiding Drain Line
- Q&A: Will the MORryde X-Factor Work With Frame Hangers That Have Gussets?
- Video: RV Appliances Explained: How to Bring Home Comfort to the Open Road
- Video: Review of Furrion RV Microwaves - Convection Microwave and Air Fryer - FR82TD
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Wiring
- Search Results: trailer leaf springs
- Video: Hands-On with the MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers