Can MORryde X-Factor Crossmember Install in Unused Hole on Front Hanger

Updated 08/22/2023 | Published 08/21/2023

Question:

I installed the Road master comfort ride suspension on my 5th wheel. I want to put the x crossmember on the front hanger but my frame is in the way. Can I use the accessories that are supplied to put the x crossmember in the upper hole where my leafspring hander bolt isnt? Will this cause damage to my bracket? Thanks

asked by: Scott W

Expert Reply:

You can use that upper hole on your hanger to install the # MR33WR. Make sure you don't tighten it down too much or you will pinch the leaf spring and it won't function properly. You will also need to make sure you have enough room to install the clamp strap above that hole. I have attached a picture below showing the dimensions of the end of the crossmember for your reference.

expert reply by: Robin H