Trailer Hitch that Fits 2020 Toyota Highlander All Wheel Drive

Question

Question:

Hello earlier this year I ordered a hitch for my 2020 Toyota highlander but when I tried to install it did not fit. Had to return it. I just want to confirm before ordering item that it will definitely fit. 2020 Highlander AWD XLE .

asked by: Edward N

1

Helpful Expert Reply:

The Curt hitch part # C99FR that you referenced is a confirmed fit for your 2020 Toyota Highlander. We had the chance to install this on a 2020 Highlander just like yours and we found it fit well and installed easily. I also checked with Curt again just now and they confirmed it fits all models including the AWD version you have as well as hybrids. Check out the install picture I attached to see it installed on a 2020 Highlander as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

We do carry more than one option for the 2020 Toyota Highlander excluding XSE. We have the Curt Class III #C45CR, and my recommendation, the Class III etrailer Trailer Hitch Receiver, #e75ZR. The Class III etrailer Trailer Hitch Receiver, #e75ZR has…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Trailer Hitch that Fits 2020 Toyota Highlander All Wheel Drive

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching