Distance Between Pin Holes and Height of Blue Ox 2.5" SwayPro Weight Distribution Shank

Question

Question:

I need to know the overall height of this product, as well as the length from the center of the hitch pin hold to the center of the weight distribution holes.

asked by: Kyle

0

Expert Reply:

In regards to the Blue Ox SwayPro Weight Distribution Shank part # BXW4028, the distance from the center of the hitch pin hole to the center of the adjustment holes is 9". The overall height of the shank is 12-1/2" when measuring from the bottom to the top of the vertical portion.

expert reply by: Conner L

0

Answer 1

Your math is correct. Since the distance between the mounting holes of the Blue Ox weight distribution shank part #BLU26FR is the standard 1-1/4 inch and there is a total of 9 holes that would mean that there is 10 inches between the top and bottom…

view full answer...

Answer 2

Yes, the Blue Ox SwayPro Weight Distribution Shank part #BXW4028 will work with the Blue Ox SwayPro Weight Distribution part #BXW1503. Please note the above is for underslung (coupler under frame) couplers which are not very common. If you have an…

view full answer...

Answer 3

The Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop #EQ90-02-4700 is compatible with your Blue Ox SwayPro #BXW1500. With a 7" rise and 3" drop it will be the closest equivalent to the old BXW4018's 8"…

view full answer...

Answer 4

Since you already have the Blue Ox SwayPro Weight Distribution w/ Sway Control item #BXW1000 I would not recommend buying a new one to go with your Grand Design Imagine 2970rl. The tongue weight range on that Blue Ox is 750-1,000 lbs so you're…

view full answer...

Answer 5

Blue Ox SwayPro Weight Distribution system #BXW2003 is compatible with the following Gen-Y Torsion Weight Distribution Shanks: #325-GH-1302 (video linked) #325-GH-1102 #325-GH-1202 The Gen-Y shanks accept weight distribution heads with holes spaced…

view full answer...

Answer 6

Sorry to hear about your troubles. Based off of the information you have provided me it sounds like your father in law had a Blue Ox SwayPro System. You're in luck because there are plenty of replacement parts available for this system. To start…

view full answer...

Answer 7

Hello Loni. No, the Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts w/ 2-1/2" Receivers - 21K #GY98ER is not compatible because it has a 3/4" pin hole diameter, and the Fastway e2 requires a standard 5/8" pin hole…

view full answer...

Answer 8

Yes, you can use the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item #325-GH-625 to flat tow with. This adjustable ball mount has a 21,000 lbs capacity and fits a 2-1/2" hitch. It is compatible with the Blue Ox Base Plate Kit item…

view full answer...

Answer 9

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 10

The Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts #325-GH-0352 that you referenced is designed to fit the standard weight distribution heads found on nearly all weight distribution systems. Most of the time if there's an issue…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Distance Between Pin Holes and Height of Blue Ox 2.5" SwayPro Weight Distribution Shank

Product Page this Question was Asked From

Continue Researching