Does Install of Draw Tite Hitch on 2020 Ford Escape Require Frame Drilling

Question

Question:

Hello. Can I view the install instructions before purchase? Want to verify that enlarging access holes or drilling are not needed. Also want to see if this is a project I can complete myself. Thank you! Vehicle is a 2020 Ford Escape Hybrid.

asked by: Martin W

0

Expert Reply:

There isn't any drilling or hole enlarging required to install the Draw Tite # DT92RR that you referenced. I also attached a picture that shows the install instructions as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Actually it fits both! The etrailer Hitch item #e89YR is confirmed to fit all models of the 2023 Ford Escape. This hitch is custom fit and bolts to your Ford with included hardware. I really like this hitch because the crossbar is completely…

view full answer...

Answer 2

Hey Scott, so the most economically priced hitch that fits your 2022 Ford Escape is the Draw Tite part #DT92RR which is a Class II hitch that has a 1-1/4 inch opening that you could use a rack like the Hollywood Racks Trail Rider #HR200Z in.

view full answer...

Answer 3

I suggest the Curt Trailer Hitch Receiver, #C23FR. This is a Class III - 2", custom fit hitch designed specifically for the Ford Escape. This bolt-on installation comes complete with needed hardware kit and installation instructions included.…

view full answer...

Answer 4

The Curt #C23FR and etrailer Hitch #e89YR have the same design and specs. The main difference between the two is the powder coat finish. The Curt has a glossy finish while the etrailer hitch has a matte finish. The matte finish gives it more of an…

view full answer...

Answer 5

Yes, we do have a have two hitches that are compatible with your 2022 Ford Escape Hybrid. It is the etrailer Class 3 #e89YR and the Curt Class 3 Trailer Hitch Receiver item #C23FR. These custom fit hitches are very similar except for their finishes.…

view full answer...

Answer 6

Yes it does. The Curt Hitch item #C23FR is confirmed to fit all models of the 2023 Ford Escape including the hybrid. This hitch is custom fit and bolts to your Ford with included hardware. I really like this hitch because the crossbar is completely…

view full answer...

Answer 7

The two available hitches for your 2022 Ford Escape Hybrid, are almost identical. We have the etrailer Trailer Hitch #e89YR and the Curt #C23FR. They are both very capable, class II hitches with 2" receiver openings. They are both rated up to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Does Install of Draw Tite Hitch on 2020 Ford Escape Require Frame Drilling

Continue Researching