Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
2025 Buick Enclave
These items fit your vehicle
2025 Buick Enclave
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
With a 3,500 lb maximum gross trailer weight rating and 525 lb maximum tongue weight, this Class III hitch receiver gives you the versatility to tow small campers, lightweight boats, or utility trailers with confidence. The standard 2" x 2" receiver opening works with most bike racks, cargo carriers, and ball mounts, so you can easily switch between hauling gear and towing a trailer without extra adapters.
The fully welded square-tube hitch bolts directly to your vehicle’s frame using the included hardware kit — no welding or special equipment needed. It’s the kind of setup you can handle in your own driveway with common tools. A concealed main body keeps the cross tube tucked up behind the bumper for a clean, factory-like finish once everything is bolted up.
This hitch is constructed from sturdy steel and finished with a gloss black powder coat over a protective base coat for superior corrosion resistance. It’s also co-cured in a rust-resistant liquid Bonderite coating inside and out. That means it stands up to road grime, rain, and salt year after year while keeping its good looks.
The precision robotic welds ensure consistent strength across every connection point for reliable towing performance. Each hitch is tested in accordance with SAE J684 standards to verify safety and durability. It’s built for years of dependable use whether you’re towing on weekends or adding cargo space for your next trip.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
We got this for our 2020 Ford Escape Hybrid. My wife and I installed in a couple hours. Had to make a couple existing holes in the frame a little larger, but everything else was fairly simple. It tucks up under the car so nothing drags when going over a dip in the road. We use it for a bike rack to carry 2 heavy ebikes. No problems at all.
Very solid Hitch. Looks like it is made very well (heavy).
Pat C helped me with the order.
Installed on a 2020 Ford Escape Sport Hybrid using a small trailer.
Hitch fit well, I had to enlarge the front bolt holes.
Keith
9/15/2021
Very good Trailer hitch.
Great hitch for the 2021 Ford Escape titanium hybrid. The only thing is it’s not necessarily so easy to install as advertised. Luckily the dealership I bought my car from agreed to install for free because they had to modify the exhaust hanger (bend it a bit) to prevent the hanger from rubbing on the hitch. Not a huge deal, but if we were installing ourselves it would have been an issue.
Mrs C.
7/10/2022
Great. Perfect for my small SUV
This is the second time I have purchased a hitch for different vehicles through e trailer and the service and products have always been A+.
Good quality, good fit, the video is a must watch prior install.
I am very happy with the hitch/receiver. Installation went well too. Perfect!
The hitch is great An angle grinder and large drill bit worked great hogging out the 3rd hole which needs to be closer to the other hitch holes and that’s why a template would be helpful but the hitch is super sturdy
Customer service is great! The tow hitch I bought fits a 2020 Ford Escape perfectly, just word of advice it will take longer the 40 minute that described in the instruction. Give yourselves around 4 hours or so, you will definitely need it. Other than that the product looks is great. Haven’t used it yet.
Nice and easy install.
Love it!! We added the hitch receiver to carry a dirtbike on the back of my wife’s 2020 Lincoln Corsair. Zero issues
Perfect fit for my 2020 Ford Escape Titanium Hybrid. Watched video online before hand, everything went exactly as shown. Used a unibit to slightly enlarge 1 set of holes on each side to let the bolts/hardware pass through. About 1.5 hrs from start to finish. Everything about the unit is quality. And it looks great, hardly noticable.
This hitch receiver is strong, and will most likely last longer than me. However, the square receiver part is tilted slightly to the right. I got it installed by a pro, and it is installed horizontally correctly. I think the welder or a welding machine did not do a very good job. I am concerned that when I install a cargo carrier, the carrier will be tilted also, which my wife and I will not like. I am attaching a picture, and it shows a very slight lilt. That tilt will be amplified with the carrier because it's 5 feet long. I don't want to go through the hassle of getting it removed and returning, so I will keep it.
Great hitch that lasted for years! I would definitely buy another one.
Also, go Red Wings!
Lazer S.
9/23/2025
Glad to hear you liked it, Nate! What were you using it for? Hopefully we see you in Saint Louis for the Blues vs Red Wings game!
This is the second purchase of this product for our new Corsair vehicle. Installation is reasonable with assistance of a second person. I recommend creating a template of the holes on the unit to mark placement on the vehicle instead of tracing the rear hole using the unit itself. Watch the E-Trailer video to learn how to perform the installation since the manufacturer's paper instructions lack the complete details. The design is such that the bulk of the unit is hidden from view behind the rear bumper.
Both products fit and work perfectly. Had both installed in under 3 hours in garage using floor jacks.
Rick P.
9/19/2025
Have had zero issues after using this for a year now.
This hitch fit our 2020 Escape Titanium Hybrid perfectly! As a 68 yr old, I was able to install this hitch single-handedly (with the help of a piece of firewood cut to the appropriate length to support the other end of the hitch) in about an 90 minutes while laying on the ground. The online video is very helpful and we'll done! NOTE for you DIY's: I was able to insert the backing plates and the bolts without enlarging the slots on the sides of the frame rails. CAUTION: wear safety goggles to keep the sand and dirt from getting in your eyes while working under the vehicle, you'll be thankful afterwards! I couldn't be happier with my dealings with etrailer or with the quality of this hitch!
Received quickly. Box was a little damaged, but product is good.
The hitch receiver appears well made.
I have not installed it yet, but so far I am a happy customer.
Fits my 2020 Hybrid Escape and looks nice. Installation was pretty simple, except I needed to enlarge both the hole used to pass bolts through and the elongated holes in the frame rail. I used a Dremel since that's what I had on hand. I wish the holes in the hitch matched the bolt holes in the vehicle and that the bolt heads were modified so there wouldn't be any need for vehicle modification. I feel it's a bit over-built, especially for the hybrid since the OEM hitch has a max tongue load of 350lb and hybrid is rated for a 1500lb trailer. I'll also mention the foot activated liftgate still works. Oh.. and I also wish the bolts were a little bit longer. Some of them just barely peek out the other side of the nut.
Great hitch receiver. Install went well and fits perfect. Was done by myself. Installed on a 2022 Ford Escape.
The only thing I had to do which wasn't clear in the instructions is I had to open up the front hole in the frame enough to accommodate the head of the carriage bolt not just the plate. I actually put the first plate in place and found out I couldn't get the bolt in the hole in the frame. So I just had to open the hole in the frame a little larger. No problem. I didn't need an extra set of hands, I used jack stands and floor jack for install without raising the vehicle.
Excellent product and price.Installation won’t be a problem,shipped quickly.
The instructions were good, easy to follow.
The hitch looks good.
Super easy straight forward installation. All of the mounting holes lined up perfectly.
Wishing, hoping I have plugin type plug in behind my taillights, So the wires DO NOT have to be cut into. But A great deal on price of Hitch! AND fast shipping. I am surprised it arrived so fast! Its all closed up, so only the installer will open the package.
If you can read, you too can install the Curt trailer hitch in an hour or so. You need to elongate existing round holes to accept the bolts. I used a 1/2 carbide double cut teardrop rasp in my Makita 1/2" cordless. You will drop your exhaust to accommodate the placement of the hitch. Do it while it's cool if you're outdoors. You will work-up a sweat. Installation of the bolts is genius.
The shipping was fast and accurate. I have received the product but have not yet installed the hitch.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don B.
7/11/2023
We only have our bike rack and bikes on the car when were towing our Escape behind our motorhome. Weve traveled about 7,000 miles so far and the hitch has worked well with no problems.