How to Determine Correct Hub and Drum for Older Boat Trailer
Updated 06/01/2020 | Published 05/28/2020 >
Question:
I am looking for a brake drum kit to fit 8 drums to fit an older boat trailer. As an FYI, the tires that I need to replace it are your Kenda Loadstar K364 Trailer Tire - 6.90/6.00-9 - Load Range C # AM10040. Do you have something like that, or know where I should look? Thank you for your help!
asked by: Deborah J
Helpful Expert Reply:
It is possible we have the right hub and drum (which I think is what you were referring to by brake drum kit) for your older boat trailer, but more information is needed to determine the right hub for your trailer, which I can help you figure out.
You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use digital caliper and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo I've attached to see exactly where you need to measure.
Additionally, you need to know your hub's wheel bolt pattern; if you do not know what it is I have added a help article which details how you can find it, as well as a printable bolt hole template you can use. If you get back to me with this information I'd be happy to try and help you find the correct hub and drum. I've also added a link to our entire selection for you to go back to.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: Setting Up Your etrailer Trailer Idler Hub Assembly for 2K Axles
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly
- Video: Feature Review LubriMatic LMX Industrial Strength Grease
- Video: Review of the Bearing Buddy Bearing Protectors-BB1980A
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-EZ-K
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Q&A: Fit of Wheel Mounting Pad on Face of Trailer Hub
- Q&A: Replace Hub Assemblies With Bearing Buddies For A 2,000 Lb. Trailer Axle
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Q&A: How to Select Replacement Hub for Fleetwood Coleman Destiny Pop-Up Camper
- Q&A: Bearing Buddy And Spindle Grease Seal For The AKIHUB-545-2-1K Idler Hub Assembly
- Q&A: Is There A Hub/Drum Assembly For A 3,500lb Axle That Will Fit A 12" Wheel
- Q&A: Is There Version of 2k Rated Trailer Hub with EZ Lube Spindle Access Dust Cover
- Search Results: brake cleaner
- Search Results: grease
- Search Results: 1~1/16 inch diameter trailer spindles
- Search Results: grease packer
- Search Results: trailer axles
- Search Results: hubs
- Search Results: grease gun
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Bearing Packer - Plastic
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased





