Bearing Buddy And Spindle Grease Seal For The AKIHUB-545-2-1K Idler Hub Assembly
Published 01/18/2024 >
Products Featured in This Question
Question:
Looking to purchase Bearing Buddies and seals for a trailer that uses your hub assembly AKIHUB-545-2-1K. Can you please confirm the proper parts are: Bearing Buddy 1980A Spindle grease seal BB60001 Also, I see the stainless steel Bearing Buddies 1980A-SS are slightly less money than the non-stainless. Is there a reason I would NOT use the stainless? This trailer will be solely used on the highway, not a boat trailer. Thank you.
asked by: Ron B
Expert Reply:
It looks like you did your homework Ron, because the Bearing Buddy # BB1980A and the Spindle Grease Seal Set # BB60001 are indeed the proper parts for the # AKIHUB-545-2-1K idler hub assembly. This hub uses the # L44643 inner bearing, so the bearing buddies and seals you picked are sized perfectly.
I will not pretend to fully understand our pricing algorithms, but if the stainless bearing buddies # BB1980A-SS are currently on sale I would definitely go with those. The chrome has decent rust resistance, but stainless is always preferred and will hold up better over time than chrome. Absolutely no reason not to use stainless in this case.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.99 Inch
- 2000 lbs Axle
- 2500 lbs Axle
- 3500 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Search Results: 13515
- Search Results: 171255
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: Trailer Axle With Spring Center To Spring Center Measurement Of 48
- Search Results: trailer hubs and drums
- Shop: Timken 473336 Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: Setting Up Your etrailer Trailer Idler Hub Assembly for 2K Axles
- Search Results: grease
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel - Qty 2
- Q&A: Replacement Trailer Axle Grease Seal Options For Hub Using National 203025 Seal
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-EZ-K
- Video: Comprehensive Review: Bearing Packer
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly
- Q&A: Is There Version of 2k Rated Trailer Hub with EZ Lube Spindle Access Dust Cover
- Q&A: 2,000 lb Axle Hub with 5 on 4-1/2 inch Bolt Pattern that Can Fit 12 inch Wheel
- Q&A: How to Determine Square and Round Tube Axle Capacity
- Q&A: Replace Hub Assemblies With Bearing Buddies For A 2,000 Lb. Trailer Axle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: bearing grease
- Search Results: hubs

