How to Select Replacement Hub for Fleetwood Coleman Destiny Pop-Up Camper
Updated 07/21/2020 | Published 02/19/2017
Question:
I need both hubs for the above camper. Fleetwood Destiny Parts list says the hub part # is 4738D0451 Seal # 4714A2201 bearing and race pkg # 4716-1101 Axle shaft is 1 1/16inch dia. 7/8inch of thread then 3 1/4inch to lip which is 1 1/2inch dia by 1/2inch long It is a 5 Lug 4.5 on ctr Hub has markings of HA 908 and G4 1492 Gross camper weight is 1875# Axle tag says 1800# will your part number AKIHUB-545-2-1K work?
asked by: Jeff G
Expert Reply:
To select a set of replacement idler hubs for your Fleetwood Destiny trailer you want to match up a few characteristics from your originals. These include the axle weight capacity, wheel bolt pattern and the bearing set used in the hubs. A replacement hub must use the same inner and outer bearings as the original in order for it to fit on your spindles.
The linked page displays 5-on-4-1/2-inch bolt pattern idler hubs for 2K axles. Hub # AKIHUB-545-2-1K works with wheel diameters from 8- to 12-inches and uses bearing L44643 as both its inner and outer bearing. The linked photo shows you the usual appearance of bearing numbers.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: trailer spindles
- Search Results: cotter pin
- Search Results: hubs
- Search Results: bearing grease
- Search Results: grease
- Search Results: 1~1/16 inch diameter trailer spindles
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-35-G-EZ-K
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Q&A: Is There Version of 2k Rated Trailer Hub with EZ Lube Spindle Access Dust Cover
- Article: Most Popular Wheel Bearings
- Video: Setting Up Your etrailer Trailer Idler Hub Assembly for 2K Axles
- Shop: CE Smith Shackle Bolts with Lock Nuts - 3-1/2" Long - Qty 2
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Trailer Leaf Slipper Spring With Smallest Capacity
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Video: Torflex Lift Kit Feature Review
- Q&A: Bearings, Races, and Grease Seal Recommendation for a 1995 Coleman Stoney Pop Up
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Video: Feature Review LubriMatic LMX Industrial Strength Grease
on Trailer Hubs and Drums
Alex S.
7/16/2020
Just looking to see what size wheel bearings I need for my 98 Coleman pop-up tent trailer Fleetwood Casa Grande