Trailer Hitch Compatible with 2019 BMW X3

Question

Question:

The right part is Draw-Tite #76226. Please correct this so others do not have to go through hours of not being able to make this work. CURT only makes the right one for the OLDER BMW X3s, not the current one.

asked by: Patrick L

0

Expert Reply:

For your 2019 BMW X3, the Draw-Tite # 76226 you referenced and the Curt # C13387 are the only options in our fit guide. I confirmed with both manufacturers this fit on your vehicle. The Curt option is confirmed by the manufacturer to fit 2018 to present X3 models.

I'm not sure what hitch you were referring to as not a fit, but any hitch other than these two are not confirmed to fit. I've linked the page to our fitguide for your vehicle to assist.

If you will be towing with this hitch, I also recommend using the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 to give you the 4-way flat trailer connector while protecting your vehicle electric circuits.

expert reply by: Jason S

0

Answer 1

Hi Vince; for a hitch you can use the Curt #C99RV. If you would prefer a completely hidden design like the Stealth Hitch you were looking at then the correct one is the #SH75VR. The Stealth Hitch comes with the towing kit that has the required ball…

view full answer...

Answer 2

Hello Greg, I cannot personally see any difference between the M40i and sDrive for the 2019 BMW X3. We haven't done an install on the M40i, so I can't say for sure what the difference would be regarding the #C99RV hitch and #SH46FR for…

view full answer...

Answer 3

For your 2020 BMW X3 30i, I'd recommend the Curt Class III hitch, part #C13387. The installation is probably beyond the reach of the typical do-it-yourself-er, because the rear bumper and fascia need to be temporarily removed. I'll link to…

view full answer...

Answer 4

Honestly Ladd, not much. All of the hitches: the Curt #C13387, Draw-Tite #76226, and etrailer are basically the same size, weight (30 lbs), and have the same weight capacities. The only thing separating these hitches is going to be the actual brand…

view full answer...

Answer 5

Both the Draw-Tite #76226 and the Curt #C13316 are fits for the 2015 BMW X3. Both hitches are pretty much on par as far as quality goes. The Draw-Tite does have a higher tongue weight and towing capacity as you mentioned, but you'd be limited to…

view full answer...

Answer 6

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76226 is what I recommend for a 2021 BMW X3 xDrive30e. I checked with Draw-Tite and was able to confirm fit for you as well. This is a bolt-on hitch option with no drilling required and it has a…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

No, it will not Bryan. The Redarc Tow-Pro Link item #RED57AR requires a USCAR port that comes with factory tow packages. The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item #SH25VR, that fits your 2023 BMW X5, does not have this…

view full answer...

Trailer Hitch Compatible with 2019 BMW X3

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching