2 inch Lift Kit for Tandem Axle Trailers

Question

Question:

Looking for the Tandem Axle Kit? Got that? And before you say 2 of the single that would be wrong...I dont need an extra set of pieces. Correct Track Trailer Alignment and 2 Lift Kit - Single Axle thanks,

asked by: Dan

0

Expert Reply:

The correct track alignment/2 inch lift was replaced by the 2-1/4 inch lift kit for tandem axles # RR23QX. This is basically the same thing.

expert reply by: Jameson C

0

Answer 1

We do have a note on this issue: Will not work with E-Z Flex suspension systems due to the length of the wet step bolts. Assuming you could obtain wet bolts that are long enough you could use Correct Track with the E-Z Flex suspension system.…

view full answer...

Answer 2

There would need to be two brackets per hanger so the Single axle Correct Track kit #LC87120 would only need four brackets to mount on both sides of the hangers. A tandem axle trailer #RR23QX would have 3 hangers per side and require 12 brackets and…

view full answer...

Answer 3

I do have an option for you but the reason your trailer dropped in overall height is because you removed the center hanger extension which is used in the Lippert Correct Track. In order to then go back to the ride height you had before the equalizers…

view full answer...

Answer 4

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 5

Hey Brian, I believe you are asking about the Correct Track lift kit part #RR23QX and why it can't be used with the CRE3000 kit like part #MR87ZR. The clearance issue is the square brackets of the Correct track that would need to attach to the…

view full answer...

Answer 6

Hey Michael, so the Curt Trailair part #LC155943 that you referenced was not designed to offer a different ride height from the pin boxes it replaces so it would not be the way to go if you were wanting to make a height adjustment. What I would do is…

view full answer...

Answer 7

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 8

I attached a link to a page that has install instructions for the Correct Track kit part #RR23QX that you referenced. I'd recommend the shackle bolt kit part #MR58ZR as it comes with the correct size bushings, bolts, and shackle straps.

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

I suggest going to a lower profile sidewall like you have asked about. 225/75R15 is 28.3 inches tall and 205/60R15 is 24.7 inches tall. The problem with the 205/60R15 is that is a passenger tire not a trailer tire. Passenger tires have a different…

view full answer...

Answer 11

The biggest advantage and reason most people go with a larger trailer tire is the increased weight capacity that the larger tires offer. The larger diameter offers a negligible amount of better ride quality for the trailer since the larger the tire…

view full answer...

Answer 12

There are really only two standard trailer tire sizes for 15" wheels, 205/75-15 and 225/75-15 with the latter being the taller option (28.4" diameter x 8.9" wide vs. 27.3" diameter x 8.1" wide). I recommend the Karrier…

view full answer...

2 inch Lift Kit for Tandem Axle Trailers

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching