What Rails Will Fit My 2026 Ford F-250 w/o a Puck System That Work with a Curt Fifth Wheel?

Question

Question:

Looking for rail kit for 2026 f250 with 6.7' bed and no factory puck system that work with my Curt Fifth wheel hitch

asked by: Frederick M

0

Expert Reply:

Hi Fredrick,

The Curt Custom 5th Wheel Kit for Ford part # C16424-104 is not compatible for your 2026 Ford F-250, so it wouldn't work with your truck's frame.

For your 2026 Ford F-250 with a 6 3/4" truck bed without a factory OEM puck system, I recommend you use the PullRite Custom Installation Kit w/Base Rails for 5th Wheel Trailer Hitches part # PUL82MR. It has custom brackets designed for your truck so there will be little drilling required. The PullRite base rails are compatible with most brands of fifth wheel hitches, including your Curt fifth wheel hitch, and is rated for 24,000lbs towing.

How much are you planning to tow with your new F-250?

expert reply by: Claire H

0

Answer 1

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 2

Jarrod, you’re thinking about this exactly the right way, and I like that you’re trying to make it a smooth handoff for the buyer. Since your Curt A20 worked in a 2022 F-250 with the factory puck system, that means you’ve got the puck-style version…

view full answer...

Answer 3

Hey Dave, thanks for reaching out. We have just the thing! To add a 7-way to the bed of your 2026 Ford F-250, you will need the following: - Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds - 10' Long #C57010

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

What Rails Will Fit My 2026 Ford F-250 w/o a Puck System That Work with a Curt Fifth Wheel?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching