bing tracking image
Q & A Icon

How Do I Install The Golf Cart Risers for Mad-Ramps Pivoting Ramp System?  

Updated 07/24/2026 | Published 07/20/2026

Question:

How do I install the Mad Ramps golf cart risers.

0

Expert Reply:

Hey Rick, thanks for reaching out. The Mad Ramps Golf Cart Risers included with the # MR89RV kit are very straightforward to install. They bolt directly onto the existing ramp surfaces of your Mad Ramps system using the included hardware. Here are the basic installation instructions:

1. Position each riser on top of its corresponding loading ramp.
2. Line up the pre-drilled holes in the riser with the holes in the ramp.
3. Install the supplied bolts, washers, and lock nuts.
4. Tighten the hardware evenly until the risers are securely fastened.
5. Repeat the process on the second ramp and verify both risers are installed at the same height before loading your golf cart.

Once installed, they raise the loading surface by about 2 inches, giving low-riding golf carts with 10" or 11" wheels the extra clearance needed so the underbody doesn't drag while loading.

What kind of trailer are the ramps going on?

expert reply by:
0
Jesse M
Golf Cart Risers for Mad-Ramps Pivoting Ramp System
Golf Cart Risers for Mad-Ramps Pivoting Ramp System
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>