Love to DIY? Use this rail kit, a trim kit (sold separately), and plywood bottom (not included) to build a tray that perfectly fits your cargo compartment. And you can easily slide these rails out of your RV to grab your camping gear.
Features:
Specs:
Additional parts you may need:
Pair this rail kit with a tray trim kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper. This is perfect for you if you're a DIY'er or if you have a uniquely shaped compartment that wouldn't fit a pre-made tray. You can slide the rails out so you can easily grab camping gear without needing to crawl into your cluttered or cramped compartment.
Determining Which Rail Kit You Need
To figure out which rail kit you need, measure the overall inside length of your cargo compartment. The measurement you get is the maximum length the rail kit should be, though you may need to go with slightly smaller rails to account for any potential clearance issues. For example, for this 54" rail kit, your cargo compartment shouldn't be shorter than 54" long. If your cargo compartment is shorter or longer, please reference the table below.
| Length of Cargo Compartment | Rail Kit You Need |
|---|---|
| 42" | LC370782 (42") |
| 48" | LC370783 (48") |
| 54" | LC370785 (54") |
| 60" | LC370787 (60") |
| 80" | LC370761 (80") |
| 90" | LC370762 (90") |
Determining Which Tray Trim Kit You Need:
The trim kit needed to complete your SuperSlide II is sold separately. To determine which trim kit you need, measure the width of your cargo compartment opening, and then subtract 4. This ensures that the tray would have the proper clearance as it slides in and out.
| Width of Cargo Compartment | Trim Kit You Need |
|---|---|
| 27" | LC370674 (23") |
| 28" | LC370676 (24") |
| 31" | LC370678 (27") |
| 34" | LC370680 (30") |
| 36" | LC370682 (32") |
| 37" | LC370684 (33") |
| 40" | LC370688 (36") |
| 41" | LC370690 (37") |
| 43" | LC370692 (39") |
| 48" | LC370755 (44") |
| 52" | LC370757 (48") |
| 55" | LC370759 (51") |
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a look at this rail kit for the Kwikee SuperSlide II RV Storage Slide Out Tray Assembly. Now, these rails are going to pair with a tray trim kit that is sold separately to form a slide out tray for your RV or camper's cargo compartment to give you the ability to store camping and hiking gear, tools, power cords, and a whole lot more. Now, this does require carpet-covered plywood for the bottom and, of course, that is not included with this either. And this is going to fit cargo compartments at least 54 inches long. And then the tray weight capacity when this is fully assembled and installed is going to be 800 pounds.
Now, as you can see, I do have this set up somewhat precariously here on blocks. I just wanna give you an idea of what this is going to look like when you have this put together. I don't have it bolted down or anything like that, so it's gonna be a whole lot more stable, obviously, when you actually have this installed. But I just wanted to show you here how this operates, and this.. To begin to pull this out, we do have this locking mechanism here, so you're just gonna push that down to give you the ability to slide these rails out.
And of course, they're gonna slide together when you have that plywood base installed. So they're easily gonna slide in and out. And then when you slide it all the way in, then it's going to secure into place. So then you're not gonna have to worry about this accidentally sliding out or coming out when you're going down the road. So it just moves this latch down.
That's going to allow you to pull your tray out. And then when you push it all the way back in, it'll secure in place. Now this is made here in the USA of a durable steel construction, and this is gonna be a relatively easy bolt-on installation into your cargo compartment. These preassembled rail assemblies with instructions, as you can see right here, are included. And this is...
I do wanna point out that the wood screws and the 5/16-inch hardware are not included with this. So this includes everything that you see here on my table. And to determine which rail kit you actually need, you're just going to measure the overall inside length of your cargo compartment. And whatever measurement you get is the maximum length of the rail kit that you'll need. So for example, for this 54-inch rail kit, your cargo compartment shouldn't measure longer than 54 inches. Depending on your RV or camper setup, you might need to go with a rail kit that is slightly smaller than your cargo compartment to account for any potential clearance issues. The trim kit needed to complete your SuperSlide II is sold separately. To determine which trim kit you need, measure the width of your cargo compartment opening and then subtract four inches. For example, if your cargo compartment measures 55 inches wide, then you would need a 51-inch trim kit. This ensures that the tray would have the proper clearance as it slides in and out. Now, for more detailed information, be sure to take a look at this product page, and the product page will give you more information about which trim kits you need and how to determine that based on your measurements. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Just received the product. It appears to be robust and good quality. I have not installed it in my RV yet.
1
Very good product and a great company to work with even if you have issues with a product they try to make it right
Very sturdy, just what we were looking for to add a pull out box to a survey truck. Box screws on and the rails bolt to the bed of the truck.
These rails are exactly what I need for my specialized application - a coffin slide mechanism for a crypt-themed escape room. They arrived on time and in good condition. They are bulletproof and appear to be well made. My application will need a slide that can function again and again many times a day for years to come. These slide rails look to be a great place to start. I got great service from order to receipt of product... I would definitely order from this vendor again!
These are great! Super strong I’ve been using them for a year now for a couple of generators.
Included 1 page instructions were focused on building a platform and not clear on slide rail insertion method into fixed rail.
Great product! Very well made. I used them to build a custom sized storage drawer in the back seat area of my work truck. This allowed me to use the maximum amount of space to store my battery powered tools in the cab, preventing further damage being stored in the service bed. If I need more slides, you will get my business!
Do you have a question about this RV Cargo Slide?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.