I Need a Copy of the Instructions for the etrailer Trailer Hitch Receiver part # e98843

Question

Question:

The videos are great for the installation but they refer back to the instructions for the torque values. I cannot find the instructions in the box. Can you send me a PDF or give me the torque values?

asked by: Robert E

1

Helpful Expert Reply:

The torque specifications for etrailer Trailer Hitch Receiver part # e98843 are included in the instructions which are linked for you below.

expert reply by: Randy B

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hey Eric, yes the Curt hitch part #C37RV does fit the PHEV versions of the 2026 Kia Sorento like you have so it would work great. I attached a picture of a review from a customer that installed it on a PHEV for you to check out as well. Are you…

view full answer...

Answer 5

Hi Dale! We have a couple wiring harnesses that will fit your new 2026 Hyundai Santa Fe and I have them all listed below: Without Factory Towing Package: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236 With Factory Towing…

view full answer...

Answer 6

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Answer 7

Hello Daniel, Our etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98843 is going to be a great fit for your 2019 Kia Sorento. I really like how our hitch is the only one that comes in the Matte Black finish.…

view full answer...

Answer 8

Hey Michael, Curt hitches are generally my favorite hitch to recommend as in our experience we have found them to just have the tightest quality control and they are also made in the USA. We have year of experience with them to back that up so I…

view full answer...

Answer 9

Hey Don, congrats on the new truck and thanks for all of the information! I recommend the Roadmaster Direct-Connect Base Plate Kit - item #RM87NQ. Roadmaster's baseplate kits and wiring set the standards for flat towing as far as quality and…

view full answer...

Answer 10

Great questions I am glad you asked them. I have solutions for them. You will need the Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System #SM99209 and the Demco SBS Air Force One Coiled Air Jumper Kit for 2019 to Present…

view full answer...

Answer 11

The trailer hitch I recommend for your 2019 Hyundai Santa Fe is the Curt Trailer Hitch Receiver #C13195 because it is a complete bolt-on installation so you will not have to drill into your Hyundai's frame in order to mount it. I have added a…

view full answer...

I Need a Copy of the Instructions for the etrailer Trailer Hitch Receiver part # e98843

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching