bing tracking image
  1. Trailer Hitch
  2. etrailer
  3. Class III
  4. 2 Inch Hitch
  5. 5000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2017 Lexus GS Turbo
etrailer

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Part Number: e98843
In Stock
$204.48
Trailer Hitch
Not Confirmed to Fit

2017 Lexus GS Turbo

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. Great Prices for the best trailer hitch from etrailer. etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part number e98843 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (846)
  • Q & A (0)
  • Photos

etrailer Trailer Hitch - e98843

  • Class III
  • 2 Inch Hitch
  • 5000 lbs GTW
  • Visible Cross Tube
  • 750 lbs TW
  • etrailer
  • For Towing

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer
  • Matte black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
    • Maximum tongue weight: 750 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty


Rugged, Matte Black Finish

The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.


Matte Carbide Finish vs Glossy Finish

Matte Carbide Finish vs Glossy Finish

etrailer Technical Support

At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



e98843 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide

Installation Details E98843 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.8

846 reviews
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.

by:

Fit perfect. I installed it by myself though a 2nd person would have made it easier.



by:

The item arrived quickly. The box had a few holes and the hitch itself had a few minor scuffs but I painted them before installing.

Installation was fairly straightforward. Took me about 4 hours working alone. The instructions were clear and accurate. It fits well and seems sturdy. I attached my cargo carrier but still need to give it a real road test.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

3/11/2025

Install looks great, Todd! What kind of cargo do you usually haul in your cargo carrier?



by:
2018 Kia Sorento

i put this on a 2016 kia sorento. it came quickly and fit perfectly. i had to make some unexpected wiring changes to make the camper lights work. but the hitch has been flawless. FYI: sold the 2016 a few months ago for a 2018 kia v6. hoping the hitch on that works as well.......

Jim profile picture

Jim

7/5/2025

i no longer have the camper that i used this for. but up until about 3 months ago, i used this hitch regularly. always reliable never gave me an issue.



by:
2017 Kia Sorento

Excellent fit and finish and mounted up to our Kia Sorento with ease. Very good installation video and instructions. Using for an electric bike rack so excited to try it out soon.

Victoria H. profile picture

Victoria H.

3/19/2025

I'm happy everything worked out smoothly for you Steven and that the installation videos were useful to you, too! E-bikes are so much fun! Hopefully your new set up makes it easier for you to find fresh terrain you've yet to explore.



by:

The best aftermarket accessory I have ever installed. Start to finish, my young son & I installed in 2-hours with him doing a lot of the work. Watch the video more than once, keep it handy. Forget the written instructions, why bother?
Toughest part was unhooking the muffler hangers; use the lube.
The plastic cover behind the wheel has 2 nuts. They stay attached to the cover so just pull the thing down after unsrewing them and the push-pins are out.
Had to persuade the large bolts through the holes, so the advice to clean & pre-fit all the bolts was great.
Clearance was a concern with a 4-bike folding rack, but the spacing is ample while not too excessive. The flat black finish hides the hitch under the bumper, won't notice it unless you're looking. [And be honest - you look, right?]
100% confident in the quality, design & security of the assembly.
OK, the box needs a few more reinforcement panels but the bolts were cleverly secured in the hitch so they didn't fall out and really, it's a trailer hitch that lives under the car, not a coffee table. So what?



by:

This looks like a very well made product, but I wish I had known how heavy it is compared to other hitches. If I had a pickup I'd love to have this heavy of a product, but on an SUV, it adds a lot more weight



by:
2020 Hyundai Santa Fe

The site makes it easy to look for what you need specific to each vehicle. Shipping, was on time as they estimated it to be BUT when I received the item, there were three pretty decently sized tears in the box. I was very surprised as it was shipped UPS and I’ve never had issues like this. Upon calling to explain and speaking with William S who handled my order, we were able to come to a compromise as I didn’t have time to have a new one shipped. Very satisfied with my experience with this company, especially using them for the first time.



by:

Install of the hitch took longer than I expected, but the wiring connector went very smoothly. Hitch has worked well. Time to retighten some bolts….



by:

I've been very happy with the harness from etrailer it was used with my etrailer hitch to drive across the country to our new home and was flawless.



by:
2017 Kia Sorento

This is the second hitch that I have ordered from etrailer. I giving it a 5 star because it did fit. When I opened the box there were places that were wore down to the bare metal. I had some flat black spray that i used to cover the metal. I think it could packaged better. It should have in great big letters that all "BOLTS ARE NOTE SAME". I failed to see that the bolts were different dia. going through the frame. I got one stuck and cost me a lot of time. This is my fault! I couldn't get the rubber muffler hanger off the right side. After I removed the wheel it was easy. Steering is easier to turn, you can tell the weight has changed on the car. I might try to find some small rubber spring bumpers for the rear coils. Just like to feel the front wheels with more contact to the road. My last hitch looked good til I sold my car and hope this one is the same.

Victoria B. profile picture

Victoria B.

11/5/2019

When your trailer hitch has paint that has flaked off, covering the bare spots with spray paint is a great idea and what we recommend. Ive attached an installation video of this hitch on a 2018 Sorento. Around the 5:55 mark our installer calls out to use the smaller size carriage bolts on the passenger side. Your tip of taking the tire off to get better access to the muffler hanger is also a great suggestion. Finally, I checked our fit guide and unfortunately we do not currently have any suspension enhancement designed to fit your 2017 Kia Sorento.



by:
2016 Kia Sorento

Everything lined up almost perfectly. The only problem I had was with some of the threaded holes on my car, they wouldn’t accept the nuts, I had to do multiple applications at WD-40 and a stainless steel reamer to finally get all the bolts to thread in. This thing is a beast!!



by:

received the hitch and custom wiring harness. everything fit perfectly, instructions and videos were on the money. This is my third purchase from etrailer.com Their prices and products are the BEST. keep up the Great job!!!!!

Stuart profile picture

Stuart

5/25/2020

Hitch has worked with out any issues. Purchased a new travel trailer using a WDS. Also purchased Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional. Installed it and works great. If your tired of looking on line for towing accessories just go to etrailer. They haven’t let me down.



by:

The trailer hitch is outstanding except for one problem. When you mount everything...you cannot access the bolt to lower the spare tire. You have to use a wrench because the hitch is in the way.

Edmund profile picture

Edmund

12/3/2022

The product is great other than always having a 11mm wrench on hand to get the spare wheel off because the hitch is in the way of the rotating thing to lower than wheel.



by:
2017 Kia Sorento

Works great for hauling our jet ski!! Thank you again!!

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

7/16/2025

Where were you headed off to, Belinda? Let me know the next time you head off somewhere with the jet ski, I'll meet you there!



by:
2019 Kia Sorento

Well made. The long bolts did not line up very well. Took a lot of effort to install the hitch. Still don't know why it was necessary to remove the rubber plugs.



by:

Installed myself in about an hour. With the help of my floor jack it was very easy. Would have been easier with two people. Watched videos on installation. Very straight forward. Going to carry a luggage rack for musical equipment ( mic stands, music stands, sign rack ect.). Wish I took pictures of installation.

Anthony profile picture

Anthony

7/18/2020

Working great! Also using with a bike rack and occasional rental trailers



by:

The hitch is very solid, and goes on quickly and easily. How easy depends on the tools you have at your disposal. I had a lift and other equipment to hold the hitch in place while securing it. Most of the time was spent just reattaching plastic nuts on the bottom of the KIA. You have to lower the spare tire on the KIA, as well as remove the plastic box on the left side, this allows you room to thread the side bolts and tighten them. I bought this hitch so I could use bike racks with a 2" receiver for maximum strength. I'm very happy with it.



by:

Dad and son mounted it in about 2 hours. It is definitely what my Dad needed.



by:
2019 Hyundai Santa Fe

Used a local installer that was on etrailer site. The whole process was relatively inexpensive and super easy.



by:
2020 Hyundai Santa Fe

I bought this for my 2020 Hyundai Santa Fe (base model) to tow a light flatbed trailer and also to attach my bike rack to (see photo). This was an easy install. I recommend watching the video that etrailer has posted, and to get the tools recommended - especially the strap to hold the muffler up and the pry bar to get the muffler rubber mounts off. You'll also definitely need someone to help you because it's pretty heavy and cumbersome to to slide into place. I can tell the hitch receiver was built with quality materials and craftmanship. You'll need longer zip ties if you end up purchasing a wiring harness in order to strap down the long cables. Definitely worth buying.



by:
2019 Kia Sorento

I purchased this hitch based on the recommendation from etrailer's video comparison of all that are available for my 2019 Kia Sorento. I'm very impressed with the quality and fit. As per the installation video, which I watched before I placed my order, the end mounts needed spread apart approximately 3/4 of an inch. I chose to start the bolts on the driver's side and use a c-clamp to pull the passenger side in place. Total installation of hitch and wiring harness took just under 2 hours including cleanup afterwards. It might have gone a little quicker if I had gotten help getting it into position.



by:
2019 Hyundai Santa Fe

Excellent service! Delivered product on time and it was a perfect fit. I bought the Etrailer hitch after comparing it to the Curt Hitch. Its the same hitch except the Etrailer is flat black vs. the Curt which is gloss black. I like the Etrailer because it is much less noticeable when not in use. I'm completely satisfied with the hitch and the service i received. I added the plain plug for a smooth finish.



by:

Quality product! The instructions were clear, accurate and complete with torque specs for the bolts. The installation video, that was shot on my exact car, told exactly what would have to be moved to install. The hitch is well engineered to fit over and under exhaust etc. and to line up perfectly with the bolt holes in my frame. With help to lift, it was installed in about a half hour. The textured finish looks great too. Great product, pro-active customer service, good price and prompt shipping. Highly recommend this company



by:

I installed this hitch on my 2020 Hyundai Santa Fe. It was the easiest install I have ever done. All holes lined up perfectly. Printed out the directions and watched the video a couple of times and all went perfectly. Very solid. Will use for mounting a double bike rack and a cargo platform. Thank you etrailer!



by:
2020 hyundai Santa Fe

Perfect fit for 2020 Santa Fe. Site videos were helpful with showing how to install. Definitely have a helper when it comes time to mount the hitch. It's next to impossible to do it by yourself.


25
846
Show More Reviews

See what our Experts say about this etrailer Trailer Hitch

  • Hitch Recommendation for 2019 Hyundai Santa Fe
    For your 2019 Hyundai Santa Fe the three hitches you mentioned are very similar in design between the Draw Tite part # 75908, the Curt # C13195, and the etrailer # e98843. They all would install all the same without any being more difficult than the other. The etrailer and Curt are actually made at the same factory so they are essentially the same but the etrailer has a matte finish instead of glossy that we've found is the most durable. So since it has the highest towing capacity too...
    view full answer...
  • Recommended Hitch for a 2019 Kia Sorento SXL Using a Bike Rack
    Hey John. The best hitch for your 2019 Kia Sorento SXL is going to be our etrailer item # e98843 you were looking at. This is a class III hitch with a 2" receiver, which is exactly what you want for a bike rack. It gives you the highest capacity with a 750 lbs tongue weight and the most options for accessories. The hitch pin hole sits back 4-1/2" from the edge of the bumper so you're bike rack has plenty of room to fold but won't stick out an excessive amount. What kind of bikes do you...
    view full answer...
  • Trailer Hitch And 7-Way Wiring Package For 2019 Kia Sorento Without Factory Tow Package
    Hello Anton, thanks for reaching out. For your 2019 Kia Sorrento I recommend the etrailer Class 3 Hitch # e98843. This has a 2" receiver, 5,000 ls towing capacity and 750 lb tongue weight capacity. Install video and instructions are linked for you below. For your wiring, there are two kits you will need to complete everything. You will need the Tekonsha T-One Wiring Harness # 118583, as well as the Universal Installation Kit # ETBC7. These will contain everything you need to wire your...
    view full answer...
  • Everything Needed for a 2019 Kia Sorento to Tow Utility Trailer
    We have everything you'll need to tow with your 2019 Kia Sorento. What we offer will also cost much less than going with components from Kia as well. Let's start with a hitch for towing the Karavan utility trailer you have. For that we have the very concealed EcoHitch aprt # 306-X7320 which looks the best since it's mostly hidden and has the best ground clearance, but it does cost the most. So for a better priced option that you'll find is a bit more visible but will still do the job great...
    view full answer...
    Image 1 for
  • Recommended Towing And Roof Rack Components For A 2019 Hyundai Santa Fe
    Hi Linda, For a 2019 Hyundai Santa Fe you'll want the etrailer Trailer Hitch Receiver # e98843 for the hitch and the Tekonsha T-One Vehicle Wiring Harness # 118784 for the wiring. A 2" trailer hitch is definitely the way to go since most accessories are made for 2" hitches and if you had a 1-1/4" accessory you could just use an reducer sleeve. To mount the 4-pole connector to the trailer hitch crossmember you can use no-drill mount # 18140. You'll still need a ball mount to tow a trailer...
    view full answer...
  • Hardware Needed to Install Trailer Hitch on 2019 Hyundai Santa Fe
    Hey Don, It sure is. Do you have a specific hitch model already, or one in mind? If you can let me know that would help me rest easier at night knowing I'm giving you the exact right information. Otherwise, using the etrailer Class III # e98843 I recommend for your Santa Fe as an example, the hardware included for installation are as follows: Qty 2, 1/2-13 x 4-1/2" carriage bolts Qty 2, HFN 1213 Grade 8 hex flange nuts Qty 3, M10 -1.25 x 30 hex bolts Qty 3, 3/8" conical toothed washers Qty...
    view full answer...
  • What Size Bolts From etrailer Hitch Fit Weld Nuts on 2017 Kia Sorento
    Hey Robert! The bolts for the weld nuts that come with the etrailer # e98843 are M10 - 1.25 so you can use the corresponding tap. We do recommend trying to clean them first to see if that works before going this route but it is certainly up to you. I went ahead and attached a help article below which covers weld nut cleaning for your reference. Are you planning to use the hitch for a bike rack?
    view full answer...
  • What Hitch, Wiring, and Ball Mount Do I Need for My 2019 Kia Sorento?
    Hello Daniel, Our etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98843 is going to be a great fit for your 2019 Kia Sorento. I really like how our hitch is the only one that comes in the Matte Black finish. It really gives it that nice OEM look. When it comes to the wiring, it depends on what you’re using it for. If you just need wiring for a hitch-mounted accessory, or a light trailer that doesn’t have brakes, you’ll want the Curt T-Connector Vehicle...
    view full answer...
  • Availability of Class 2 Hitch for 2017 Kia Sorento SX
    Hey Mark! The only hitches available for your 2017 Kia Sorento SX are Class III like the # 306-X7320 you looked at or our own etrailer # e98843. Is there a specific reason you would like a Class II? If you have something that needs to fit a 1-1/4" hitch you can use a reducer like # e63YR.
    view full answer...
  • Locking Anti-Rattle Hitch Pin Fit for a Swagman XTC2 TILT Bike Rack
    To lock the Swagman XTC2 TILT Bike Rack # S64671 to your etrailer Trailer Hitch Receiver # e98843 you need the Locking Anti-Rattle, Threaded Hitch Pin # S64029 you referenced, but I actually recommend picking up the Anti-Rattle Hitch Lock and Cable # S64031 instead because it comes with the same locking hitch pin as well as a cable that connects to the hitch pin to provide security both to your bike rack and the bikes you'll have loaded on it.
    view full answer...
  • etrailer and Curt Hitches Depth Comparison on a 2019 Kia Sorento
    The etrailer Trailer Hitch Receiver item # e98843 is the same hitch as the Curt item # C13195 except for the different powder coating. The etrailer hitch will have the same exact dimensions as the Curt. I have included a diagram I made that will show the dimensions of this hitch.
    view full answer...
    Image 1 for
  • Adding a 7-way Connector to a 2020 Kia Sorento while keeping a 4-way for Multiple Trailers
    I recommend using a 4-way harness part # C56332 to then add a 7-way and 4-way converter part # ETBC7. Once you have the 4-way harness hooked up, then you can convert it to a 7-way and 4-way. This is a straightforward install and I have attached a couple of install videos to help walk you through the process of getting everything installed. If you also need a hitch, I recommend part # e98843. This hitch is a straightforward install and looks nice on the back of your Sorento.
    view full answer...
  • Correct Trailer Wiring Harness for a 2019 Hyundai Santa Fe Without Tow Package
    The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # CU94FR is correct for a 2019 Hyundai Santa Fe even without the factory tow package. I understand this is confusing, but you will have the tow package port that the above harness plugs into no matter if the vehicle was or was not equipped with the factory tow package. I confirmed this with the manufacturer for you. The 2019+ models all have the singular tow package port. I understand the title can be confusing because...
    view full answer...
  • Swing Out Adapter and Bike Rack for a 2020 Hyundai Santa Fe
    I recommend going with a hitch mounted bike rack that attaches to a swing away system because of ease of use and potential clearance issues. If your 2020 Hyundai Sante Fe doesn't already have a hitch receiver the Curt Trailer Hitch Receiver item # C13195. I have attached a picture of what it will look like installed on a Sante Fe. For a swing away adapter, I recommend the Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches item # Y02483. The pivoting hitch extender lets...
    view full answer...
    Image 1 for
  • Suspension Enhancement for 2019 Kia Sorento to Help with Sagging When Towing
    Not all vehicles and hitches can be used with weight distribution systems since they do put an additional strain on the overall setup. So for your 2019 Kia Sorento you can use an air spring suspension enhancement kit like the Air Lift part # AL29PD to help with the soft rear suspension. This will allow you the ability to stiffen up the suspension using air pressure.
    view full answer...
  • Clearance For Bike Rack With etrailer Trailer Hitch Receiver On 2020 Hyundai Santa Fe
    The etrailer Trailer Hitch Receiver # e98843 for your 2020 Hyundai Santa Fe has a measurement of 5inches from the center of the hitch pin hole to the most outward part of the rear bumper. I attached a diagram showing that measurement and an installation video of the etrailer # e98843 on a 2020 Santa Fe for you to take a look at. To ensure that your 1-Up bike rack will fold up properly you will need to measure from the center of the hitch pin hole to the closest part of the bike rack. As...
    view full answer...
    Image 1 for
  • Parts Needed to Tow a Trailer with a 2019 Hyundai Santa Fe
    In order to tow a trailer with a 2019 Hyundai Santa Fe you'll first need to start with a trailer hitch and for this I recommend the etrailer Trailer Hitch Receiver part # e98843 which offers a direct bolt-on fit. It has a 2" opening with class III rating so it will be great for towing or hitch mounted accessories like a bike rack or cargo carrier. In order to complete your towing setup you'll also need a 7-way trailer wiring harness and for this I recommend the Tekonsha # TK44ZR.
    view full answer...
  • Trailer Wiring Harness For 2018 Kia Sorento
    The correct 4-way wiring harness for your 2018 Kia Sorento will depend on if you have the factory tow package or not: - WITH Tow Package: T-Connector Vehicle Wiring Harness # C56332 - WITHOUT Tow Package: T-Connector Vehicle Wiring Harness # C56256 If you aren't sure if you have the tow package or not you'll have to look for a plug under the vehicle on the driver's side by the tire (you may need to remove panels in order to see). If you have the plug the tow package wiring is there....
    view full answer...
  • Recommended Class III Trailer Hitch for a 2019 Kia Sorento V6
    The engine itself doesn't quite make the difference, but the model does. If you have the SX model of the 2019 Kia Sorento I recommend the Class III etrailer.com Trailer Hitch # e98843 because it has a matte black finish that does a great job of complimenting your vehicle plus it helps to hide scratches and dings from road debris. The etrailer.com trailer hitch will also fit non-SX models, but I do have a different recommendation with the Class III EcoHitch # 306-X7320 for non-SX models....
    view full answer...
    Image 1 for Image 2 for
  • Recommended Hitch for a 2020 Kia Sorento LX
    To add a hitch to your 2020 Kia Sorento LX, I recommend the etrailer item # e98843. This hitch is custom fit and bolts to your Kia with included hardware. It is a class III hitch with a 2" receiver, that has a 5,000 lbs towing capacity, and 750 lbs maximum tongue weight. I have linked an installation video below so you can see how to get this hitch set up. If you are planning on towing you will also need a wiring harness item # C56256 if you do not have the factory towing package or item...
    view full answer...
  • Best Trailer Hitch, Wiring and Ball Mount For 2020 Hyundai Santa Fe
    I recommend the etrailer.com Trailer Hitch Receiver Class III - 2" part # e98843 for the 2020 Hyundai Santa Fe because it is made in the USA and designed with a nice matte black powder coat that shows less scratches compared to the glossy coat. For the wiring, I recommend Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector part # CU94FR which is known to be a bit more reliable compared to the other brands especially the converter boxes on the...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch For A 2020 Hyundai Santa Fe SEL
    When it comes to installing a trailer hitch on your 2020 Hyundai Santa Fe SEL The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e98843 is confirmed to fit your vehicle. The trailer hitch has a bolt-on installation with no welding required. It has a matte black finish over a protective base coat that offers superior rust resistance. The hitch has a maximum gross trailer weight of 5,000 pounds and has a maximum tongue weight of 750 pounds. I would...
    view full answer...
  • Will Hitch From 2017 Kia Sorento Fit 2022 Sorento
    Hello Nolan; the # e98843 fits the 2016-2020 models of the Sorento. You will need a different hitch since there have been changes to the frame that won't allow the old one to fit. We don't have an etrailer hitch for the 2022 but you can use the Curt # C37RV. It looks like you had trailer wiring which will also need to be replaced. If you have the factory tow package you need the # CU94FR. If you do not have the factory tow package you can use the # C99DR if you have LED taillights or...
    view full answer...
  • Recommended Complete Towing Setup for 2019 Kia Sorento and Tear Camping Trailer
    We can help you get your Sorento ready for towing your new teardrop and we'll start with the hitch. I recommend the 2-inch Class III etrailer hitch # e98843 because it is USA-made and has a high 750-lb tongue weight capacity. It also offer no-drill installation as shown in the linked video. The included photo shows the clean appearance of the installed hitch. For the brake controller we will need to start off a with a 4-pole trailer harness. If your Sorento has the factory tow package,...
    view full answer...
    Image 1 for


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Ethan H
Video by:
Ethan H
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee Ryan G
Test Fit:
Ryan G
Employee Adam E
Test Fit:
Adam E
Employee Jesse B
Test Fit:
Jesse B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Written by:
Kristina F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<