Trailer Hitch and Wiring Recommendation for a 2016 Kia Sorento

Question

Question:

I have recently purchased a 2016 Kia Sorento and would like to install a trailer hitch and wiring harness. My question is how would I know if my vehicle is tow ready so I will know which harness to purchase?

asked by: Erwin

0

Expert Reply:

If your 2016 Kia Sorento has the tow package most likely it will have a trailer hitch and wiring already installed on it from the factory. You can also check the original window sticker for the vehicle to see if it had it or not. Also you can take the VIN of the vehicle to a Kia dealer and they will know.

For a hitch you would want the part # 75908 as it has been confirmed as a fit for your vehicle.

If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.

If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.

For trailer wiring you would want the part # C56256 for if you do not have the tow package or part # C56332 for if you do have it. However, either way the # C56256 will fit your vehicle.

expert reply by: Jameson C

0

Answer 1

The Draw-Tite #75908 is more hidden with the recessed aspect of the hitch pin hole being 5-1/2 inches from the outermost part of the bumper. The height is 15-1/2 inches from the inside top of the receiver to the ground. The Curt #C13195 is very…

view full answer...

Answer 2

The elements that comprise a factory tow package vary greatly from manufacturer to manufacturer and even between different model vehicles of the same manufacturer. Based on my research, it looks like the tow package for your 2016 Kia Sorento would…

view full answer...

Answer 3

For trailer wiring for your 2017 Kia Sorento we have the Curt Harness part #C56256 which is a fit for if your vehicle does not have the factory tow package and then if your vehicle does have the tow package you instead would want the part #C56332. I…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

Hey Eric, yes the Curt hitch part #C37RV does fit the PHEV versions of the 2026 Kia Sorento like you have so it would work great. I attached a picture of a review from a customer that installed it on a PHEV for you to check out as well. Are you…

view full answer...

Answer 9

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Answer 10

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 11

Good morning to you as well Steve, and congrats on your new van! I would be more than happy to make a recommendation for you! The best hitch for your 2026 Toyota Sienna, is going to be our etrailer item #e56RR. This is a class III hitch with a…

view full answer...

Answer 12

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Trailer Hitch and Wiring Recommendation for a 2016 Kia Sorento

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching