Differences Between Curt Class III Trailer Hitches for 2015 Subaru Forester

Published 03/06/2020

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(42)

$255.93

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2619)

$12.45

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1358)

$12.80

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(566)

$178.34

Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs

(3838)

$30.91

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(3400)

$41.72

Question:

Are there any real difference between the Curt Hitches #C13144 and #CU64FR? CU64FR looks like the crossmember sits a little higher but neither truly hang low ... why the $75 difference?

asked by: AJ

Expert Reply:

The primary difference between the two is that once installed, the # C13144 will be completely visible from the rear of the vehicle. The # CU64FR is designed a bit differently, the hitch crossbar will be concealed behind the bumper with the only visible portion of the hitch being the receiver tube and the safety chain hoops. The # CU64FR is preferred by most because the entire hitch isn't visible. Because we pay more for the hitch and it's more in demand, the # C13144 is priced higher.

If you'll be using the hitch for towing, you'll need a few other items to complete your towing system. For a trailer wiring harness, you'll need # C56040 and a ball mount like # C45010. For a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball. You'll also need a pin and clip, part # PC3.

I've linked to some installation videos, instruction for both hitches and a photo showing what both hitches look like when installed.