Dimensions of SumoSprings SSF-201-47 and SSR-610 40

Question

Question:

SSF-201-47 and SSR-610 40 Does anyone know the length of these, excluding mounting stuff?

asked by: Bill

0

Expert Reply:

The dimensions of just the jounce spring itself of the SumoSprings Solo Custom Helper Spring Kit # SSR-610-40 are 4 inches tall x 3 inches in diameter. These dimensions are without the included bracket and with the spring under no pressure. The # SSF-201-47 is 2-3/4 inch horizontal and 3-1/4 inch vertical.

expert reply by: Jameson C

0

Answer 1

You would definitely want to go with the Timbren kit part #TGMRCK25S for your 2006 Chevy Silverado 2500HD over the other kit you mentioned. The other kit is for severe service applications so it would give you a pretty harsh ride quality. The…

view full answer...

Answer 2

The Timbren #TGMRCK15S have an 8,600lb capacity while the Timbren #TGMRCK25S only have a 6,000lb capacity. If your 1999 Chevrolet Silverado is only used for occasional heavy loads I would go with the 6,000lb kit otherwise the 8,600lb kit will provide…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Jairo. So we do not offer a direct replacement for the Norcold N611, but we do have a good replacement option for you. It really comes down to what will fit in your cutout space. Take a look at the Norcold RV Refrigerator w/ Freezer - 8.2 cu ft -…

view full answer...

Answer 10

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 11

Hey Mary, thanks for reaching out. We do have a hitch for your 2005 Chevy 2500 HD that is up to the task. Here is what I recommend: - Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15703 This is the strongest hitch…

view full answer...

Answer 12

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Dimensions of SumoSprings SSF-201-47 and SSR-610 40

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching