Can I Install the Bright Way Breakaway Kit with a Charge Line for the Breakaway Battery

Question

Question:

Can I Install a Breakaway Kit with a Charge Line for the Breakaway Battery

asked by: Steve S

1

Helpful Expert Reply:

The Bright Way Trailer Breakaway Kit # 3802354 can be installed in a manner that either does or does not take a charge from the tow vehicle while it is running; the best way to complete an installation where it does take a maintenance charge from your tow vehicle's 7 way connection is using the Bright Way Trailer Breakaway Charger # 3802349. Installing this charger in the manner shown in the review and installation video linked to this answer is going to be the best way to make sure that your breakaway battery always has a charge on it so that you're always prepared for the worst case scenario.

You can also install this kit without the charger by simply connecting the positive terminal of the breakaway battery into the 12v auxiliary power line on your 7 way connection, but this could lead to overcharging the battery or potentially draining your vehicle's battery so I do recommend using the add-on kit.

expert reply by: Erik B

1

Answer 1

When installing the Replacement Battery Charger for Bright Way Trailer Breakaway Kit #3802349 I also recommend installing the Single Park Light Diode #RM-690 just to be on the safe side of things. I've tried reaching out to Bright Way to see if…

view full answer...

Answer 2

The easiest way to cut the oval hole for the Rubber Grommet, #a70gb, in my opinion, would be to use a Light Mounting Bracket for 6-1/2 inch Oval Trailer Lights, BK70BB, as a template and then use a hole saw the correct size to cut a hole on each end…

view full answer...

Answer 3

The Bright Way Solar Battery Charger part #BRW54FR is for a single battery or a single bank of batteries (12 Volt Only). If you have multiple batteries or multiple battery banks then you'd need to hook up a solar panel to each depending on your…

view full answer...

Answer 4

We have the Bright Way Trailer Breakaway Kit #3802339 which is the entire kit. Or we have the Battery #3801250 and Charger #3802349 separately if your case is not damaged. The charger maintains the charge on the battery when connected to your…

view full answer...

Answer 5

The first thing to check is that the power source you have the Bright Way Switch Mode Battery Charger #BRW77FR is actually producing power. If you have power you should see at least the "Power On" light lit up on the charger. You can also…

view full answer...

Answer 6

The #STL22CCRB lamp you referred to is typically mounted in a grommet, like part #A70GB, which in turn is mounted in a bracket like part #337LB1SS. If you were planning on cutting a hole to mount the lamp and grommet, the hole will need to measure…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Can I Install the Bright Way Breakaway Kit with a Charge Line for the Breakaway Battery

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching