What Size Hole to Mount Optronics 6-1/2 Inch Oval Taillight # STL22CCRB

Updated 11/12/2013 | Published 11/08/2013

Products Featured in This Question

Tinted Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Clear Lens

(21)

$20.66

Mounting Bracket for 6-1/2" Oval Trailer Tail Light - Stainless Steel

(24)

$13.87

PVC Grommet for 6-1/2" Oval Trailer Tail Lights

(1012)

$4.53

Question:

Do you guys have a cut diagram or template that can be provided for what size hole to cut to mount the lights?

asked by: Dan

Expert Reply:

The # STL22CCRB lamp you referred to is typically mounted in a grommet, like part # A70GB, which in turn is mounted in a bracket like part # 337LB1SS. If you were planning on cutting a hole to mount the lamp and grommet, the hole will need to measure 6-3/4 by 2-1/2 inches, as you can see in the diagram I provided.

The easiest way to cut the hole would be to use a 2-1/2 inch hole saw, and cut two holes 6-3/4 inches apart (measured outside-to-outside). You could then use snips or a rotary tool to remove the materiel in the middle.

expert reply by: Mike L