Replacement Control Unit For Kwikee RV Steps Upgrade Kit LC379145

Question

Question:

In may 2018 we purchased a step motor conversion kit LC379145. I am in need of just the controller. What is the part number?

asked by: Reefside A

0

Expert Reply:

The replacement control unit for the Motor Upgrade Kit for Kwikee Electric RV Steps part # LC379145 is part # LC379146.

expert reply by: Heather A

0

Answer 1

The correct replacement for a Kwikee Step Motor 369545 is the Replacement Motor for Kwikee Electric RV Steps part #LC379147.

view full answer...

Answer 2

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…

view full answer...

Answer 3

The correct step control for you is the Lippert Components Kwikee Step Control with Override and PKD part #LC379605, not the Lippert Components Kwikee 9510 Control for IMGL/9510 Step Control part #LC379146 or the Kwikee Revolution Step Control Module…

view full answer...

Answer 4

We do have a direct replacement for your Kwikee Steps 1800709 controller - this is found as the Replacement Control Unit for Kwikee 38 Series Electric RV Steps #LC363989 on our site. Our part numbers may differ from the manufacturers but I've…

view full answer...

Answer 5

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 6

I suggest the HydroMax RV Fresh Water Pump, #P25201 as this works well as a direct replacement for most 3-gallon-per-minute (GPM), 12V pump. From information available to me, it appears your existing Shurflo 2088-403-144 pump features very similar…

view full answer...

Answer 7

For your Dometic DuoTherm the Advent Air Unit part #ACDOM150 would be your best option that will give you the higher BTU rating 15k and easily connects to the current wiring you have now.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Control Unit For Kwikee RV Steps Upgrade Kit LC379145

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching