Replacement Step Control for Lippert Kwikee Series 41 Steps 1800709

Question

Question:

I have a series 41 step 904109000. It does not have a magnetic switch. Does have light. What is the difference between the above controllers. Descriptions do not help. Do not want to have to change any plugs. Controller that came off is Powergear 1800709 Rev OF.

asked by: Todd

0

Expert Reply:

The correct step control for you is the Lippert Components Kwikee Step Control with Override and PKD part # LC379605, not the Lippert Components Kwikee 9510 Control for IMGL/9510 Step Control part # LC379146 or the Kwikee Revolution Step Control Module part # LC363985.

expert reply by: Conner L

0

Answer 1

I have included the correct replacement parts for your 2012 Tiffin Open Road with Kwikee Series 41 steps below. - Replacement Motor for Kwikee Electric RV Steps #LC379147 - Replacement Gear Box and A Linkage for Kwikee Electric RV Steps #LC379160 -…

view full answer...

Answer 2

The correct replacement for a Kwikee Step Motor 369545 is the Replacement Motor for Kwikee Electric RV Steps part #LC379147.

view full answer...

Answer 3

We do have a direct replacement for your Kwikee Steps 1800709 controller - this is found as the Replacement Control Unit for Kwikee 38 Series Electric RV Steps #LC363989 on our site. Our part numbers may differ from the manufacturers but I've…

view full answer...

Answer 4

I spoke to my contact at Lippert Components (LCI) and they informed me that the Lippert Components Kwikee Revolution Step Control Module part #LC363980 is the correct replacement model for your Lippert Components Kwikee Revolution Steps pn…

view full answer...

Answer 5

The replacement control unit for the Motor Upgrade Kit for Kwikee Electric RV Steps part #LC379145 is part #LC379146.

view full answer...

Answer 6

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…

view full answer...

Answer 7

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 8

I suggest the HydroMax RV Fresh Water Pump, #P25201 as this works well as a direct replacement for most 3-gallon-per-minute (GPM), 12V pump. From information available to me, it appears your existing Shurflo 2088-403-144 pump features very similar…

view full answer...

Answer 9

Yes, the correct replacement control module for a Kwikee 1800709 is the Replacement Control Unit part #LC363989.

view full answer...

Answer 10

For your Kwikee 32 Series RV steps, you can use the: -Replacement Motor for Kwikee Electric RV Steps #LC379147 for a replacement motor. For a replacement control module, you're going to need the: -Replacement Control Unit for Kwikee Electric RV…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Step Control for Lippert Kwikee Series 41 Steps 1800709

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching