Correct Roadmaster Rear Anti-Sway Bar for a 2017 Ford F-450 With In-Bed Camper

Question

Question:

I wanted to purchace a Roadmaster Rear Sway Bar, but was confused about the RM-1139-193 vs the RM-1139-190. Could you clearify please?

asked by: Mike O

0

Expert Reply:

The correct Roadmaster Rear Anti-Sway Bar for a 2017 Ford F-450 is part # RM-1139-190, not part # RM-1139-193 which is for a Ford F-350. The Roadmaster Rear Anti-Sway Bar is an excellent option to improve stability while hauling an in-bed camper so you made a great choice and it will be a bolt-on, easy to install option.

expert reply by: Conner L

0

Answer 1

Hey Matt, so the biggest difference between the Hellwig and Roadmaster sway bars that fit your 2022 Ford F-350 is the diameter of them which is what directly influences how stiff they are. The Hellwigs are a smaller diameter than the Roadmaster so…

view full answer...

Answer 2

Yes, the Roadmaster Front Anti-Sway Bar for Trucks Item #RM-1139-180 that you referenced is a confirmed fit for your 2016 Ford F-250 2WD and would work well.

view full answer...

Answer 3

The Roadmaster Rear Anti-Sway Bar Item #RM-1139-173 is 1-3/8" diameter in size while the stock anti-sway bar on the 2017 Ford F-350 Super Duty is around 1/2" thick. Since your 2017 Ford F-350 Super Duty is DRW you'll need the Roadmaster…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 6

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hi Hilario, congrats on the new truck! ^___^ If this were my truck and I was installing a retractable cover on it (which I actually did with my Silverado), I would go with the manual RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte…

view full answer...

Answer 10

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 11

Hey John! The toilet you have now is the Dometic SeaLand 111, and the Dometic 411 RV Toilet #DMC74JF will be a great replacement for it. The 411 is specifically designed as a low-profile toilet for RVs with a raised toilet platform. It measures…

view full answer...

Answer 12

Hey Adam, this is a great question but yes the Dometic 411 RV toilet part #DMC74JF does come with everything needed to install including a flange seal like you asked about. Aside from the toilet it comes with: Floor flange seal Two floor-mount…

view full answer...

Correct Roadmaster Rear Anti-Sway Bar for a 2017 Ford F-450 With In-Bed Camper

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching