Will Rhino-Rack 11-Fishing Rod Carrier Fit 2-3/4 Inch Wide & 36 Inch Long Crossbars

Question

Question:

Im interested in the roof-mounted fishing pole holder 11 pole version. My roof rack cross bars are 2 and 3/4 inch wide x 36 inches long Ford Expedition 2003. Will the mounting hardware that comes with the pole holder fit to clamp onto the roof rack?

asked by: Mark

0

Expert Reply:

Yes, the Rhino-Rack Fishing Rod Carrier # RR576F will absolutely fit the 2-3/4 inch wide & 36 inch long crossbars on your 2003 Ford Expedition without any issue.

I have added a link to a video review of this carrier for you to check out as well.

- Rhino-Rack Fishing Rod Carrier - Locking - 11 Fishing Rods # RR576F

expert reply by: Kyle S

0

click to enlarge

Answer 1

From what I could find on the Snugtop Canopy's for the 2016 Toyota Tacoma, they do not appear to come with rails. It seems the rails are most likely an aftermarket addition. If the rails on your canopy are Thule or Yakima, you can use the…

view full answer...

Answer 2

Here are the 71" Vortex Aero Crossbars #RRVA180B-2. In almost every case there are not cross compatible brands with roof racks. The T-Tracks deviate in size enough to make other brands not work with each other. You won't have an issue with…

view full answer...

Answer 3

The Rhino-Rack #RR576F Fishing Rod Holder for 11 rods will not directly connect to the Pioneer rack, but I do have a couple of solutions. You can mount a pair of Rhino-Rack #RR43138B Accessory Bars to your Pioneer platform, then attach the 11 rod…

view full answer...

Answer 4

The Rhino-Rack Fishing Rod Carrier #RR576F offers multiple installation options. It can mount to a roof rack by clamping around the rack crossbars (round, square, aero, elliptical, and most factory crossbars) or it can be installed in the top channel…

view full answer...

Answer 5

The Rhino-Rack Ski and Snowboard Carrier, #RR576 is marketed for 6 pairs of skis or 4 boards and is 27-9/16" Long. The Rhino-Rack Fishing Rod Carrier, #RR576F has the same dimensions but uses the F identifier at the end to associate with…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Will Rhino-Rack 11-Fishing Rod Carrier Fit 2-3/4 Inch Wide & 36 Inch Long Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching