Can Caster Wheel of ARK Extreme Off-Road Trailer Jack Be Easily Swiveled

Question

Question:

The axle of the jockey wheel on this ARK unit is not offset like all of the others. Can the trailer still change direction easily by hand?

asked by: Gary

1

Helpful Expert Reply:

It sure can, the caster wheel or the ARK # ORJW1SU isn't offset because the ratcheting arm is used to rotate the caster wheel so the trailer will be easy to maneuver around. If you click the provided link, you can see a product description video that explains how the jack works

expert reply by: Mike L

1

Answer 1

Per the manufacturer The Xtreme Off-Road Ratcheting Trailer Jack w/ Wheel - Sidewind #ORJW1SU has a clearance of roughly 61.55 mm or 2.4 inches. So it will work on your frame. The jack has a sturdy steel construction which is durable and built to…

view full answer...

Answer 2

When fully retracted, or collapsed the jack is 28.58 inches tall, and 38.42 inches tall when extended as shown in the provided diagram. I've linked you to a product description video featuring the #ORJW1SU ARK Extreme Off-Road Ratcheting Trailer…

view full answer...

Answer 3

The Extreme Off-Road Ratcheting Trailer Jack part #ORJW1SU has a 770 lb weight capacity which means so long as the tongue weight of the trailer does not exceed this then you'd be fine. A trailer with GVWR of 4,000 lbs would be no worry at all.

view full answer...

Answer 4

A trailer jack is not made to allow you to bolt a different wheel and tire to it. Typically, a replacement wheel is going to be specific to the jack, and the same size as the current wheel. The design just won't allow for it, you wouldn't…

view full answer...

Answer 5

The Extreme Off-Road Ratcheting Trailer Jack w/ Wheel - Sidewind - 10" Lift - 770 lbs - Zinc #ORJW1SU weighs 41 lbs packaged for shipping. It likely will add about 39 lbs to your tongue but depending on your trailer balance it may not all be…

view full answer...

Answer 6

The Extreme Off-Road Ratcheting Trailer Jack #ORJW1SU has a static weight capacity (load support) of 770 lbs but ARK does not do a test for dynamic load rating, so it's hard to say what kind of trailer load this jack could move. If you're…

view full answer...

Answer 7

No, but I have one that will! Since your caravan weighs 5,000 lbs the Ark Xtreme item #ORJW1SU is going to be way under capacity. Instead you'll want to use the Trailer Valet 5X Swivel Jack and Trailer Mover item #STC-V211. This jack attaches in…

view full answer...

Answer 8

I will start by saying the ARK Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU will fit frames that are 2" to 6" tall. The bolt hole measurements vary and I included a diagram with everything listed, but the overall dimensions of…

view full answer...

Answer 9

I do have an option for you but the Xtreme Off-Road Ratcheting Trailer Jack part #ORJW1SU isn't quite cutout out for what you're wanting. Instead, I recommend the Trailer Valet 5X Swivel Jack and Trailer Mover part #STC-V211 which is rated…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Can Caster Wheel of ARK Extreme Off-Road Trailer Jack Be Easily Swiveled

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching