Which Roadmaster Reflex Steering Stabilizers Fit 2020 Ford F-53 Motorhome Chassis

Question

Question:

I have a fairly new Roadmaster steering stablizer off of a Workhorse W22 chassis. Can I use this stablizer on a new F53 chassis and just order the F53 mounting brackets?

asked by: David H

0

Expert Reply:

Since you have the Reflex stabilizer part # RM-RSSA already you can just go with the correct bracket kit for your F-53 with the part # RM-RBK25 if you have a GVWR over 24,000 lbs or # RM-RBK22 for under 24k.

I attached an install video for this kit for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

Hey Gary, welcome back! The Safe-T-Plus #ST88MR is spring-based and reactive, so it corrects steering after you start to drift. It’s simple, solid, and proven. The steering will be firmer with this system installed, so if that is what you prefer I…

view full answer...

Answer 3

Hey Don, thanks for reaching out. Yeah, the driver’s side on those F53 chassis can get tight, you’ve usually got brake lines, wiring, or a bracket sitting right where you want that Timbren to live. You’re doing the right thing paying attention to it,…

view full answer...

Answer 4

Good question, Rick. The #ST28MR blue and #ST88MR white steering stabilizer are tuned for different F-53 weight ranges. The blue version is for 24,000 lb + GVWR, while the white one fits 16,000–22,000 lb chassis. What’s your coach’s GVWR or model…

view full answer...

Answer 5

Your 2019 Coachmen Mirada 32SS is built on a Ford F-53 chassis that has a 20,500 GVWR so for a rear sway bar you'd want the part #RM-1139-145 and then for a steering stabilizer part #RM-RBK22-RSSA that you also referenced. For a front sway bar…

view full answer...

Answer 6

Hi Debbie! We do change part numbers when they are too close to other part numbers we have, and that looks to be the case here. The Safe-T-Plus Steering Stabilizer - White #ST49VR is the same thing as the Safe-T-Plus 41-180 and the Safe-T-Plus…

view full answer...

Answer 7

Hey Bob, thanks for reaching out! I have a wiring schematic for the Jensen RV Stereo #JWM60A (see attached), but I don't have one for your AWM950. You'll just need to wire in the new stereo per function (as opposed to per color) to get…

view full answer...

Answer 8

etrailer is from the US. We are right in the middle near St Louis MO in a town called Wentzville. But we sell products that are made all over. Some from US and some from other countries as well.

view full answer...

Answer 9

There is no adapter harness to convert the wiring from the Jenson JRV212T to the Jensen RV Stereo part #JWM60A. That said, this is actually pretty simple using the attached diagram. All you'll need is some wire crimpers/strippers like part…

view full answer...

Answer 10

Yes, the Voyager Camera Adaptor #31300006 is meant to be installed to 12v power. You'll want to plug the white & yellow RCA plugs into your radio, the red wire to 12v power, and the black wire to a ground.

view full answer...

Answer 11

The Voyager Multi Camera Controller #CSW3 that you referenced is actually the replacement for the CSW3014 that you mentioned as well. It's the latest version with some minor improvements. It's video quality would be as good if not better than…

view full answer...

Which Roadmaster Reflex Steering Stabilizers Fit 2020 Ford F-53 Motorhome Chassis

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching