How To Replace Rain Shield On MaxxFan Deluxe Roof Vent

Question

Question:

I ordered this Lid yesterday and am looking for the instructions on how to replace just the lid. I can find instructions on how to install the whole unit but they are vague on replacing just the lid. Thanks

asked by: Timothy M

0

Expert Reply:

There are not specific instructions on how to replace the Replacement Rain Shield for MaxxFan Deluxe Roof Vent - Smoke part # MA05-30520 on the MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke part # MA00-06401K. However, replacement rain cover attaches to the white lid portion of the fan with the hinges I have pointed out in the photo. You will need 3/4" #10 screws or you can reuse the screws if they are not in bad shape. You want to line up the hinges with the existing holes in the fan. I have attached a couple of photos to help you.

expert reply by: Heather A

0

click to enlarge

Answer 1

Hey Dan, good to hear from you again, although I do wish it wasn't because hail damaged your MaxxAir Deluxe Fan! The cover is replaceable and is available both in White #MA05-30510 and Black #MA05-30520. If you have a different MaxxAir Fan please…

view full answer...

Answer 2

To install a roof vent lid like the Replacement Lid for MaxxAir MaxxFan Deluxe #MA05-30510 for the MaxxFan Deluxe Roof Vent w/ 12V Fan #MA00-05301K, isn't considered to be a difficult task at all. The unit does not have to be removed from the…

view full answer...

Answer 3

To access the screws needed to remove the vent lid of your MaxxFan to install the new #MA05-30520 you would need to raise the lid so that you can unscrew it from the base of the vent assembly. The screws are not accessible without having the lid up.

view full answer...

Answer 4

The MaxxAir FanMate Rain Cover, part #MA00-955003 is specifically designed to fit the MaxxAir MaxxFan. The MaxxAir MaxxFan like part #MA00-04500K fits in a standard 14-inch x 14-inch opening. As the attached video shows the rain cover part…

view full answer...

Answer 5

I believe you are referring to the lid, and while I can give you some options, you do need to know the type of MaxxFan vent you have. We have replacements for MaxxFan, MaxxFan Plus, and MaxxFan Deluxe roof vents, and you can take a look at the shapes…

view full answer...

Answer 6

There is a replacement lid for the MaxxFan Deluxe Roof Vent w/ 12V Fan #MA00-07000K - the part you're looking for is #MA05-30510. If you also need the Rain Shield Assembly then we have that as part #MA10-20204 as well.

view full answer...

Answer 7

I spoke with my contact at MaxxAir and was able to verify that the Replacement Rain Shield #MA05-30520 that you referenced will work perfectly as a replacement lid for your MaxxFan Deluxe Smoke 7500K Roof Vent #MA00-07500K. You will simply use…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

How To Replace Rain Shield On MaxxFan Deluxe Roof Vent

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching