Replacement for Cracked MaxxAir Deluxe Roof Vent

Question

Question:

Hail cracked the cover on my MaxxAir Fan. Is the cover a replaceable item and if so, is it available? Thank you

asked by: Dan S

0

Expert Reply:

Hey Dan, good to hear from you again, although I do wish it wasn't because hail damaged your MaxxAir Deluxe Fan!

The cover is replaceable and is available both in White # MA05-30510 and Black # MA05-30520.

If you have a different MaxxAir Fan please let me know and I'll be happy to help you find the exact part!

Was anything else damaged on your RV? We don't get a ton of hail here in Missouri, but it makes everyone nervous when we do because you never know what might get damaged.

expert reply by: Jon G

0

John T.

6/4/2025

I need a rain shield replacement for my Maxxfan Deluxe - model 7000k - model #00-07000k - serial #2112-7000k-0241 Thanks

Jon G.

6/4/2025

@JohnT To replace the lid for your MaxxFan Deluxe Roof Vent # MA00-07000K you need the part # MA05-30510. Did the lid on your vent get damaged?

Helpful Links

tv-demo-maxxair-rv-vents-and-fans-replacement-white-lid-maxxfan-deluxe-ma00-05301k-ma05-30510.aspx

John T.

6/4/2025

@JonG Yes, cracks at the lifter bracket with the 3 screws on both sides. We were removing a cover when and the wind caught it, lifted it causing cracks and small leaks. Thanks Jon, for your quick reply.

Jon G.

6/4/2025

@JohnT That's definitely not good - glad we have a replacement for you!

Answer 1

To install a roof vent lid like the Replacement Lid for MaxxAir MaxxFan Deluxe #MA05-30510 for the MaxxFan Deluxe Roof Vent w/ 12V Fan #MA00-05301K, isn't considered to be a difficult task at all. The unit does not have to be removed from the…

view full answer...

Answer 2

I believe you are referring to the lid, and while I can give you some options, you do need to know the type of MaxxFan vent you have. We have replacements for MaxxFan, MaxxFan Plus, and MaxxFan Deluxe roof vents, and you can take a look at the shapes…

view full answer...

Answer 3

To access the screws needed to remove the vent lid of your MaxxFan to install the new #MA05-30520 you would need to raise the lid so that you can unscrew it from the base of the vent assembly. The screws are not accessible without having the lid up.

view full answer...

Answer 4

The MaxxAir FanMate Rain Cover, part #MA00-955003 is specifically designed to fit the MaxxAir MaxxFan. The MaxxAir MaxxFan like part #MA00-04500K fits in a standard 14-inch x 14-inch opening. As the attached video shows the rain cover part…

view full answer...

Answer 5

There are not specific instructions on how to replace the Replacement Rain Shield for MaxxFan Deluxe Roof Vent - Smoke part #MA05-30520 on the MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke part #MA00-06401K. However, replacement…

view full answer...

Answer 6

There is a replacement lid for the MaxxFan Deluxe Roof Vent w/ 12V Fan #MA00-07000K - the part you're looking for is #MA05-30510. If you also need the Rain Shield Assembly then we have that as part #MA10-20204 as well.

view full answer...

Answer 7

I spoke with my contact at MaxxAir and was able to verify that the Replacement Rain Shield #MA05-30520 that you referenced will work perfectly as a replacement lid for your MaxxFan Deluxe Smoke 7500K Roof Vent #MA00-07500K. You will simply use…

view full answer...

Answer 8

We do not carry an exact replacement unit for the MaxxAir Deluxe 8951K. We have the Smoke #MA00-07500K or White #MA00-07000K which would be the closest replacement. These fans use the same lift and fan motors but the control panels and circuit boards…

view full answer...

Answer 9

I have attached a photo below which shows the proper installation of a three way water heater bypass valve kit like the Camco RV Winterization Bypass Kit part #CAM35953. The female fitting on the bypass attaches to a male fitting on the water heater.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...