Recommended Thule TracRac SR Sliding Truck Bed Ladder Rack for a 2019 Toyota Tundra Crew Max

Question

Question:

I have a 2019 Toyota Tundra with Crew Max cab and short bed. There was a caution note about compatibility on your site and I was curious if you could clarify that. On the manufacturers site they refer to it being compatible as long as the utility rail is not installed.

asked by: Roger

0

Expert Reply:

The correct Thule TracRac SR Sliding Truck Bed Ladder Rack for a 2019 Toyota Tundra Crew Max is composed of part # TH43002XT and part # TH21784. There will be no issues whether you have the factory deck rail system or not.

expert reply by: Conner L

0

Answer 1

Since the 2020 Toyota Tundra Crewmax TracRac SR ladder rack fit you need is the part #TH97RV the base rail part number you need is #TH24RV.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 4

No long-term contract, Natalie - but a service plan is required to use the trackers. When you buy the 3000 with wifi assist #PM84FR, 5000 #PM64FR, or 5000 with wifi assist #PM74FR from etrailer, you’re purchasing the hardware/device only. To activate…

view full answer...

Answer 5

Hey Chris. The back-up camera wire is 66' long on the Rear View Safety Backup Camera System with Side Cameras and Quick Connect Kit item #RVS-770616-2133-NM. This is a great camera system that features a 7" LED color monitor and 2 side…

view full answer...

Answer 6

Hi Maurice, Thule offers the TracRac SR which mounts in the stake pockets so that you still have the cantilever and don't have to remove your deck rail system. If your Tundra doesn't have the stake pockets then the installation will require…

view full answer...

Answer 7

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 8

If you use a weight distribution system that's rated too high for the tongue weight of the trailer you'll experience a very harsh ride quality. You really will want to go with a lower rated system. If you tell me what brand and model system…

view full answer...

Answer 9

Hey Dan. If you positioned the hitch ball attachment towards the top of the Curt Rebellion XD Ball Mount item #C83WR you'd be level, assuming the 18" measurement you gave me is the height of your trailer's coupler. There is not a shorter…

view full answer...

Recommended Thule TracRac SR Sliding Truck Bed Ladder Rack for a 2019 Toyota Tundra Crew Max

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching