How To Raise a Keystone Outback Trailer with Tandem 3 Inch Axles  

Yes, you can install both the Correct Track Trailer Alignment and Lift Kit #RR23QX and the Roadmaster Comfort Ride Shock Absorbers #RM-2460 on your 2022 KZ Durango 5th wheel. There are extension plates that you can use or you can connect the shock…

The Correct Track Trailer Alignment and Lift Kit #RR23QX will work with the Roadmaster Comfort Ride Shock Absorbers #RM-2460, but the whole Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2460-2580 is designed to fit on a standard…

I do have a solution for you, but the Tandem Axle Lift Kit #RR23QX is essentially the old Correct Track system, just without the yellow adjustment blocks so they can't be used together. I confirmed this with my contact at Lippert. The other…

Yes, the Roadmaster Comfort Ride Shock Absorbers #RM-2460 is perfectly compatible with the Lippert Correct Track alignment hangers you have on your 2013 Keystone Alpine 3555RL.

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

As your outer hangers already have a second set of mounting holes for the leaf springs that will raise your trailer you will only need to concern yourself with the center hanger. If the center hanger is also taller with a second hole that will raise…

Hello Terry, thanks for reaching out. The Correct Track Trailer Alignment and Lift Kit #RR23QX is designed to work with standard 3" wide x 3-3/4" tall or 3" wide x 5" tall rectangular hangers. Sadly, this will not work with the…

The Correct Track Trailer Alignment and Lift Kit - Single Axle, part #LC87120, will require you to add longer wet bolts where the equalizer attaches to the hanger extension. The bolts measure 9/16" in diameter and they are 4" length, so…

I contacted Lippert and the Road Armor Shock Absorbing Equalizer Kit part #LC696740 is compatible with the Lippert Components Correct Track Trailer Alignment and 2" Lift Kit part #LC87120. If you use the road armor equalizers you will not need…

The Correct Track Trailer Lift and Alignment Kit #RR23QX you were looking at will not void the Lippert frame warranty on your trailer. This is because this kit bolts to your existing hangers and just lowers the connection points to the leaf springs…

To lift the suspension of a trailer that already has the springs on top of the axles we have lift kits like the part #RR23QX for if you have a tandem axle trailer or part #LC87120 for if you have a single axle trailer.

I do have a few options for you to raise the trailer, assuming it has leaf springs you can either go with an over under kit like the Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00 for 2-3/8" axles and part #K71-385-00 for…