MORryde Suspension Upgrade With Correct Track Trailer Alignment Wet Bolt Length

Updated 04/07/2022 | Published 04/06/2022

Products Featured in This Question

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps

(2163)

$125.09

Correct Track Trailer Alignment and Lift Kit - Single Axle

(55)

$201.28

Question:

My first goal here is to raise my camper due to my truck being too high in the rear end. My outer hangers already have a second hole for raising the camper Pictured below. Per you guys suggestion Im looking at using Correct Track Single axle LC87120 to adjust my center hanger. Since Im in there I want to go ahead and add the MORryde Suspension upgrade MR46ZR. My question is this, wont the Correct Track hanger extension make it so I will need a longer wet bolt where the equalizer attaches to the hanger extension ? And if so can I purchase just two wet bolt with the longer length and what length would that need to be ? I looked at MR58ZR but doesnt that give you longer bolts for the outer hangers with Extension plates also ? Im only upgrading the center hanger. Thanks for your help.

asked by: Dad

Expert Reply:

The Correct Track Trailer Alignment and Lift Kit - Single Axle, part # LC87120, will require you to add longer wet bolts where the equalizer attaches to the hanger extension. The bolts measure 9/16" in diameter and they are 4" length, so your wet bolts will need to be at least that length. The bolts of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps, part # MR46ZR, have the correct diameter, but they are too short. Unfortunately, we do not have wet bolts with those dimensions.

I have included a product description link and video demo links below.

expert reply by: Mark Smith