Can 2-1/4 Lift Kit be Installed on 5th Wheel Trailer With Lippert Correct Track System

Updated 01/28/2020 | Published 01/27/2020

Products Featured in This Question

Correct Track Trailer Alignment and Lift Kit - Tandem Axle

(56)

$517.68

Dexter Trailer Springs Over-Under Conversion Kit

(836)

$89.91

Question:

Hello, I have a 2015 Heartland Sundance 245RL 5th wheel, with Dexter EzFlex and Lippert Correct track systems. I purchased a 2019 Dodge Ram 2500 4x4 which is a lot taller than my old truck, I have adjusted the pin box to its highest setting and the trailer is still nose high. I wanted to know if the RR23QX kit will work to raise my 5R. I see the plates have a wing on them just as my spring hangers do see pics it is 3 inches between the wings on my existing spring hangers. Thanks for your reply.

asked by: RICHARD P

Expert Reply:

I do have a solution for you, but the Tandem Axle Lift Kit # RR23QX is essentially the old Correct Track system, just without the yellow adjustment blocks so they can't be used together. I confirmed this with my contact at Lippert.

The other option to look into is an over-under conversion kit. From what I could find you should have 3" diameter axles so you need the kit # K71-385-00. What this does is move your axle so it is located under your leaf springs instead of on top of them. This effectively raises the height of your trailer the diameter of your axle (3") plus the height of your leaf spring stack.

expert reply by: Jon G