How To Lift a 2019 Rockwood Geo Pro 19FBS

Updated 10/02/2019 | Published 09/30/2019

Products Featured in This Question

Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs

(129)

$1505.64

Torflex Lift Kit - Tandem Axle - 2-5/8" Lift

(832)

$315.43

Question:

I have a Dexter 3,500 lb axle on my 2019 Rockwood Geo Pro 19FBS. I know you have the 2-5/8" Lift Item # K71-707-02 but I want to install the 3-1/2" Lift Item # LC382741. Will this work?

asked by: Vernon

Expert Reply:

I do have an option to get you more lift but the Lippert Axle Riser Kit part # LC382741 will not work on a Dexter Torflex Axle so you will need to use the Dexter Axle Riser Kit part # K71-707-02 if this is the route that you choose. The torsion axle mounting brackets are not cross compatible between Dexter and Lippert and there is a limit to the amount of lift you can install due to the increased stress on the brackets which Dexter only allows for 2-5/8" with the Dexter Torflex #10 Axle.

If you need more than 2-5/8" lift then the only option would be to replace the Dexter Torflex Axle with the Timbren Axle-Less Trailer Suspension System part # ASR3500S06 which has a 4" lift built in and has an axle-less design so you won't have any off-road ground clearance issues either. This option can use the same hubs that you have now.

expert reply by: Conner L