Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Thanks so much for the photo that was super helpful, and what the axle tag shows is that you have a #11 Dexter Torflex axle. We do have the correct lift kit for you, which is the following part: - Torflex Lift Kit - Tandem Axle #K71-724-02 This kit…
view full answer...Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't…
view full answer...Hello Charles, thanks for reaching out. We do offer lift kits that may work on your trailer. I will need to know more about your trailer axle in order to recommend the correct lift kit. First is your axle a square torsion axle, or a round leaf spring…
view full answer...To install a larger 13 inch tire and wheel combo like the Kenda Karrier #AM31952, you will need to get more room for the wheels. With your current tire having a diameter of 21.9 inches and a width of 5.6 inches, these would be quite a bit larger…
view full answer...Your Dexter 5,200 lb torsion axles will use the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02. This is a 2-7/8 inch lift that will work well with your trailer.
view full answer...Hi Robert, So there isn't one that can be used with a cordless drill (which would be an electric jack only) as all the electric A-frame jacks are all higher than the 12" to 14" you want. There is a manual crank jack you can use which I…
view full answer...Hi Robert, So I know you don't want to, but the only option for a hitch extension for your 2-1/2 inch hitch does reduce the receiver to 2 inches. I hope you're not mad at me, but there unfortunately is no 2-1/2 inch hitch extender that also…
view full answer...I sent your axle info to Dexter and they were able to determine that you have a set of 7k Dexter Torflex axles so the correct lift you need is the part #K71-725-02 which will give you a lift of 3-1/8 inches.
view full answer...We carry replacements that could integrate into your Dometic AC system, but before purchasing anything you'll need to remove the cover of your air distribution box under the unit you're wanting to replace and look for the wire harness that…
view full answer...Since your door way width is 24 inches measured from flange to flange the correct MORryde StepAbove is the part #MR26RR. The part #MR86RR is for a smaller doorway width.
view full answer...The lift kit you need is the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02 which only comes in a set for two axles. Unfortunately we don't sell a single axle lift kit for that specific axle and the mounting hole locations are…
view full answer...The only lift kit that Dexter Axle offers for your Torflex #11 axle, for whatever reason, is the Tandem Axle Kit #K71-724-02. We've double checked with Dexter directly a few different times and this is just what they sell. With this being the…
view full answer...Filter Your Search
Contact and Help