Information Needed To Replace Wheels, Hub, and Brake Assemblies On Tantrum Caliber Trailer
Updated 09/17/2019 | Published 09/15/2019
Question:
I have a 16 ft tantrum axle caliber trailer. The wheel drum and hub all came off and Im having a hard time finding the size to buy new ones
asked by: Jeff
Expert Reply:
I am happy to help Jeff but Trailer manufactures do not make the wheel,drum and hub information readily available for public use. First to replace the wheel and tire, I would need to know the wheel diameter and tire size from the existing wheels and tires. I would also need to know the bolt pattern of the existing wheels. I have attached a helpful article that will show you how to measure for the bolt pattern information.
To choose a hub, I would need to know the axle capacity of the axle on the trailer and the bearings inside the hub. The easiest way to find out the bearing information is to pull the hub of and take the bearings out. The bearings are usually stamped with bearing numbers. Another way to figure out the bearings is to measure the spindle. I have attached a helpful diagram that shows where to measure the spindle for bearings.
If your brake assembly needs to be replaced, I would need to know the depth measurement of the hub and if the brakes are electric or hydraulic.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: trailer hubs and drums
- Search Results: measure wheel bearings
- Shop: Autoterm Diesel Travelbox 2.0 Portable Camping Heater
- Shop: Dexter Unitized Oil Seal - Double Lip - I.D. 2.250" / O.D. 3.376" - 7K to 8K Axles - Qty 1
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Camco Sleeping Bag Straps - Qty 2
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: What is the Inner Diameter of the 3,500 lbs Dexter Trailer Idler Hub Assembly?
- Q&A: How To Measure A Trailer Spindle To Find Replacement Hubs And Bearings
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Q&A: How to Determine Correct Replacement For UFP H1377 Hub
- Q&A: How to Determine Replacement Wheel Bearings for Forest River Travel Trailer
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Shop: Brake Controller
on Trailer Bearings Races Seals Caps
