Add a 7-Way Connection to a 2019 Kia Sorento Without The Factory Tow Package
Updated 09/03/2019 | Published 08/31/2019
Products Featured in This Question
Question:
In looking to install a 7 flat plug on my 2019 Kia sorento. My car is the v4 I dont have the east hookup under the back rear driver side as shown in videos. How do I go about hooking up so i can tow with a 7 flat plug.
asked by: Jordan N
Expert Reply:
In order to install a 7 way connector on your 2019 Kia Sorento, you'll need to first install the Tekonsha T-One Wiring Harness # 118583 . This gives you a 4 way connection by T'ing into the rear lights on the back of your Kia Sorento and providing you with the starting point for a 7 way connector (there is an installation video attached to this answer that will walk you through this).
From here, you'll need to install the # ETBC7 which provides you with a fully functioning 7 way connector on the back of the vehicle and still allow use of the 4 way connector. Part of this ETBC7 wiring harness plugs into the 4 way connection that you just installed. The remaining wires will be connected to the following:
Blue- Connect to Blue output wire on a brake controller
Black- Connect to the Kia's battery through the included circuit breaker
Yellow- Connect to reverse lights
White- Grounded to unpainted metal surface on tow vehicle
If you don't need the additional functions of a 7-way connector and only need the trailer lights to work, instead of the # ETBC7 , use the Adapter 4 Pole to 7 Pole Vehicle End # 30717 and don't worry about connecting the remaining wires since they will go to functions you don't need. I recommend taping them together and then capping off the ends so that there aren't any loose wires hanging down.
Since your 2019 Kia Sedona is only rated to tow up to 2000-lbs, you're likely only towing a small trailer. If you do have electric brakes on the trailer, you need a brake controller like the Tekonsha Prodigy 2 # 90885 . This requires some hard-wiring into the wires under your dash board, but to provide a quick rundown of what wires from the brake controller will go where:
Blue- Connect to 7 way connector at back of the vehicle
Red- Connects behind brake pedal to stop light switch
White- Ground wire
Black- Connect to 12v power (battery terminal)
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Video: Tekonsha OEM Replacement Vehicle Wiring Harness Installation - 2019 Kia Sorento
- Shop: Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector
- Video: 2020 Volvo XC60 Curt Trailer Connector Adapter: Complete Installation
- Video: Let’s Check Out the No-Drill Mount Bracket, Long
- Shop: No-Drill Mount Bracket, Long
- Shop: Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
- Video: Best 2019 Kia Sorento Trailer Wiring Options
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Can The Tekonsha Vehicle Wiring Harness Be Installed on 2020 Kia Sedona Without Brake Controller?
- Search Results: 7 way trailer
- Search Results: pk12711u
- Search Results: dw05745~5
- Search Results: 7 way trailer connector
- Search Results: 7 round ~ round trailer wiring
- Shop: 7-Way Round RV Style Trailer Connector - Trailer Side
- Search Results: 7 pin trailer harness
- Search Results: wireless brake controller
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors
- Video: Review of Tekonsha Replacement Wiring Harness and Brake Controller Adapter Kit - TK24FR
- Video: Mount: Universal Installation Kit for Trailer Brake Controller on a 2016 Kia Sorento
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended 7-Way Wiring on 2019 Kia Sorento for Travel Trailer Connection
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Does Curt Wiring Harness 56256 Fit 2019 Kia Sorento Without Factory Tow Package
- Article: Trailer Wiring Diagrams
- Q&A: How to Install a Redarc Brake Controller in a 2020 Kia Sorento
on Custom Fit Vehicle Wiring
