8-248 Dexter Hub Recommendation for a 3,500 lb Axle with a 5 on 4-1/2 in Bolt Pattern
Updated 03/09/2012 | Published 03/06/2012
Question:
I am looking for a replacement hub assembly for my 6x10 Continental Cargo enclosed trailer. The hubs on it right now are Dexter and marked with 8-248. I believe its a 3500# axle and the bolt pattern is 5 on 4.5. The axle spindle is an EZ Lube model with the zerk fitting on the end. Is this the correct replacement hub for my trailer? Thanks!
asked by: Bill D
Expert Reply:
Yes, the Dexter Hub # 8-248 has the same L68149 inner/ L44649 outer bearings as the Trailer Hub Assembly # 84545UC1-EZ that you referenced so it will work for you.
This hub also has a 5 on 4-1/2 bolt pattern like you need.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Bearing Kit Recommendation for Dexter 8-248 Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Search Results: dexter 8 248
- Video: All About the Grease Seal
- Search Results: k08~248~1g
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub and Bearings for Fish Right River Master Jet Boat Trailer With Dexter 8-248 Hubs
- Search Results: dexter hub 8 248
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Pre-Greased Hub Replacement for 8-248 Dexter 3,500 lb Hub with 5 on 5-1/2 Bolt Pattern
- Q&A: Replacement Trailer Hub for Dexter 8-248 Hub
- Q&A: Replacement Hub For Hay Rake with Dexter 8-248 Hub
- Q&A: Is There a Replacement Seal for 10-40 with Double Lip?