How To Install Rollers On a Pontoon Boat
Updated 08/14/2019 | Published 08/13/2019
Products Featured in This Question
Question:
Do you have a product that will help me switch from bunks to keel rollers for a 22FT pontoon boat Sylvan 8522. The intent is to make launch and retrieval easier on shallow ramps. The Trailer is a Karavan 24 X 8 dual axel. Thank you,
asked by: Carter W
Expert Reply:
It sounds like you are trying to bring the boat down closer to the trailer frame. I have personally not seen many setups that involve using keel rollers like the CE Smith Deep V Keel Roller Assembly part # CE10455G with a pontoon boat but if you have an idea in mind we do have these in various sizes. That said, I think the best option we can offer you to add a roller would be with the Dutton-Lainson Boat Trailer Deluxe Roller Bunks part # DL21741 and the CE Smith Bolster Bracket for Pontoon Boat Trailers part # CE10052-32G. I also recommend using the CE Smith Post-Style Guide-Ons part # CE27646 to help guide the boat onto the rollers. I have attached a photo of a similar setup but you would just use rollers instead of bunk boards.
Product Page this Question was Asked From
CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel and Yellow TPR - 12"
- Boat Trailer Parts
- Rollers
- Keel Roller
- Plastic
- 12 Inch Long
- CE Smith
more information >
Continue Researching
- Search Results: carpeted bunks
- Search Results: pontoon bracket
- Video: Let’s Check Out the CE Smith Narrow V-Wing Bolster Bracket for Pontoon Boat Trailers
- Video: Hands-On with the CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers
- Video: In-Depth Review of the CE Smith Bolster Bracket for Pontoon Boat Trailers
- Shop: CE Smith Narrow V-Wing Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1
- Shop: CE Smith Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1
- Shop: CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1
- Shop: CE Smith Post-Style Guide-Ons for Pontoon Boat Trailers - 22" Tall - 1 Pair
- Shop: CE Smith Bunk Style Guide-Ons for Pontoon Boat Trailers - 24" Long - 1 Pair
- Shop: Yates Endcap for Side Guide Rollers - Heavy-Duty Rubber - 1/2" Shaft - Qty 1
- Shop: Yates Side Guide Roller for Boat Trailers - Heavy-Duty Rubber - 12" Long - 5/8" Shaft
- Video: Review of Ark Boat Trailer Parts - Replacement Top Roller - ARK24FR
- Video: Ultimate Overview of the Roller Shaft with Pal Nuts for Boat Trailer Rollers
- Q&A: Recommended Roller Bunks For Pontoon Boat Trailer And Shallow Water
- Q&A: Can Roller Bunks be Used on a Pontoon Boat Trailer
- Video: In-Depth Review of the Dutton-Lainson Boat Trailer Deluxe Roller Bunk
- Q&A: Dimensions of CE Smith Deep V Keel Roller Assembly CE10405G
- Q&A: Hardware Requirements to Install CE Smith Deep V Keel Roller Assembly CE10455G
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: What is the Measured Height of the Roller to the Mounting Plate
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Boat Trailer Guides: Which are the Best?
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Converting Your RV Water Heater to Tankless
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Lighting Requirements
on Boat Trailer Parts
